RE: Licensed Internal Code Incompatible

["Pete Massiello" <pmassiello-ml@xxxxxxxxxxxx>]

What version of LIC was being installed from the TAPE?  Was that V5R4M5 or
my bet is it was V5R4M0.

Pete

Pete Massiello
iTech Solutions
http://www.itechsol.com

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of c sl
Sent: Thursday, January 15, 2009 11:19 PM
To: midrange-l@xxxxxxxxxxxx
Subject: Licensed Internal Code Incompatible

i was trying to scratch a 820 machine to V5R4 from a tape which had been
done V5R4M0 entire system backup :-

-Tape loaded into a Ultrium LTO 2 external tape drive. 
-Powered up 820 in D Manual mode. 
-V5R4M5 cd loaded into cd drive. 
-Selected Alternate Device Installation, then select Install LIC.

But error : 'Licensed Internal Code Incompatible'

Tried powering down 820; then repeat above steps, but same.
Then later it's lucky that found another cd of V5R4M0 to retry above,
everything ok.

So my concern is : why occured this error 'Licensed Internal Code
Incompatible' when using a V5R4M5 cd, while using a V5R4M0 cd seemed to fix
it ?

Search in IBM website returns a result of header related to '34942303
Library device failure', but unfortunately the web link is broken.  Is it
any relation between the external tape drive library manager and the V5R4
LIC cd, or other causes ?

Any ideas appreaciated. Thx..