RE: Determine size of load source

["Michael Smith" <msmith@xxxxxxxxxxxxxx>]

Kirk... given your response, is this a 4, 8, 17, or 35 drive?

Michael 

                            Work with Disk Status
S10A1587 
                                                            07/16/09
14:56:09 
Elapsed time:   00:00:00

 

             Size    %     I/O   Request   Read  Write   Read  Write
%      
Unit  Type    (M)  Used    Rqs  Size (K)    Rqs   Rqs     (K)   (K)
Busy     
   1  6718  13161  47.3     .0       .0      .0     .0     .0     .0
0     
   2  6718  13161  44.8     .0       .0      .0     .0     .0     .0
0     

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Kirk Goins
Sent: Thursday, July 16, 2009 2:43 PM
To: Midrange Systems Technical Discussion
Subject: Re: Determine size of load source

Michael Smith wrote:
> It has been over 15 years since I worked with hardware.
>
> How do I determine the size of the 270's load source?
>
> TIA
>
> Michael Smith
>
>   
Easiest is WRKDSKSTS and find unit #1. This will show the usable size of

the drive. If you are running Raid5 then you can look at the size and 
round up to the next size drive. For example a drive between 2GB and 4GB

is probably 4GB and drive between 4 and 8GB is probably an 8GB and drive

size between 8GB and 17GB is a 17GB, 17GB and 35GB is probably a 35GB