RE: Client Access Connectivity and Telnet

[Mike Cunningham <mike.cunningham@xxxxxxx>]

Is the telnet port blocked by a network acl?

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Pete Massiello
Sent: Wednesday, August 12, 2009 8:51 AM
To: 'Midrange Systems Technical Discussion'
Subject: RE: Client Access Connectivity and Telnet

Charles,

	I will check, but it actually connects to the machine, and just sits
there with that message on the bottom of the box saying it's connected
waiting on port 23 (or something like that).  Also, I can connect to this
machine with Operations Navigator, I am just not getting a display screen.

Thanks

	Pete

Pete Massiello
iTech Solutions
http://www.itechsol.com

Add iTech on Facebook: http://www.facebook.com/group.php?gid=126431824120

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Charles Wilt
Sent: Wednesday, August 12, 2009 8:35 AM
To: Midrange Systems Technical Discussion
Subject: Re: Client Access Connectivity and Telenet

Pete,

What's the "Verify Connection" from Client Access show?

Charles

On Wed, Aug 12, 2009 at 8:25 AM, Pete
Massiello<pmassiello-ml@xxxxxxxxxxxx> wrote:
> I was at a customer last night that had two systems. I upgraded one of
their
> systems last night from a 9406-520 to a Power6 520.  The old system didn't
> have client access.  I installed Client Access and the license keys on the
> new system.  I started Host Servers for *SIGNON and *SRVMAP.  I started
TCP
> Server *TELNET, but I still couldn't connect via Client Access.
>
> So, I tried to connect with Client Access to their other system, and that
> worked fine.  I then tried to Telnet (from my working Client Access
session)
> from the working system to the new system, and that didn't work. Now, here
> is where the confusion comes in.  I went to the Console (LAN CONSOLE) for
> each machine, and I could telnet from one system to another, and I could
> telnet on the console of the new system to itself.  So, telnet is working.
>
> I made sure QAUTOVRT was set high enough to create virtual devices, and I
> had QAUTOCFG on.  Telnet is working from above, but I can't telnet from
> another system's client access session to the new system, and I can't
> connect using Client Access to the new system.
>
> The system is running V6R1 with the latest cumulative package.  I am
running
> Client Access 6.1 on my pc.  Anyone seen this before?  Why would telnet
work
> from the other systems Console but not from another systems client access
> session?  I am not using named devices on the Client Access sessions.
>
> Pete
>
> Pete Massiello
> iTech Solutions
> http://www.itechsol.com
>
>
>
> --
> This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list
> To post a message email: MIDRANGE-L@xxxxxxxxxxxx
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/mailman/listinfo/midrange-l
> or email: MIDRANGE-L-request@xxxxxxxxxxxx
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/midrange-l.