Re: Blade and B6000414 error

[Jack Kingsley <iseriesflorida@xxxxxxxxx>]

I could see the dvd light come on as if it was reading it and then asking
for the next dvd, maybe it attempted then went south.

On Wed, Feb 3, 2010 at 4:16 PM, Pete Helgren <Pete@xxxxxxxxxx> wrote:

> Yeah, but the wierdness is that you ran through all of the media before
> you got the error (if I understand your original post correctly).  I
> would have thought you would have gotten a device error on the first CD
> (which is what I get when I forget to move the media tray resource back
> to the correct blade).
>
> Glad you figured it out.  One for the archives!
>
> Pete
>
>
> Jack Kingsley wrote:
> > The problem was that we had the dvd assigned to the partition that we
> were
> > creating via IVM but we did not move it via the AMM module using remote
> > control and then assign it from one partition to the other.
> >
> > On Mon, Feb 1, 2010 at 4:44 PM, Kirk Goins <kirkgoins@xxxxxxxxx> wrote:
> >
> >
> > > With V6R1 all you shoud need it the I_BASE 'CD' and the B2924_01 DVD to
> > > load
> > > the BASE OS. B2924_02 shouldn't even be being asked for... Here's a link
> to
> > > what's on what at 6.1
> http://publib.boulder.ibm.com/infocenter/iseries/v6r1m0/topic/rzahc/rzahcswsmedialabel.htm?resultof=%22%6b%65%79%65%64%22%20%22%6b%65%69%22%20%22%6d%65%64%69%61%22%20
> > > On Mon, Feb 1, 2010 at 12:07 PM, Jack Kingsley <
> iseriesflorida@xxxxxxxxx
> > > > wrote:
> > > >
> > > > Thanks, will give it a try again.
> > > >
> > > > On Mon, Feb 1, 2010 at 2:47 PM, Pete Helgren <Pete@xxxxxxxxxx> wrote:
> > > >
> > > >
> > > > > Jack,
> > > > >
> > > > > I have the I_BASE_01 DVD, the B2924_01 and B2924_02 DVD's and that is
> > > > > it.  I had the printed copy of the Media Contents listing and those
> are
> > > > > the only DVD's listed.
> > > > >
> > > > > Perhaps you have some bad media although it still doesn't completely
> > > add
> > >
> > > > > up.
> > > > >
> > > > > Try Pete M's approach and see what happens I guess.
> > > > >
> > > > > Pete
> > > > >
> > > > >
> > > > > Jack Kingsley wrote:
> > > > >
> > > > > > The last CD on this then is the B2924_02, correct.
> > > > > >
> > > > > > On Mon, Feb 1, 2010 at 11:23 AM, Pete Massiello
> > > > > > <pmassiello-ml@xxxxxxxxxxxx>wrote:
> > > > > >
> > > > > >
> > > > > >
> > > > > > > I would do a manual IPL back into DST, and you will have an option
> > > to
> > >
> > > > > > > install the operating system.  I would do this, and make sure that
> > > it
> > >
> > > > > > > completes.
> > > > > > >
> > > > > > >        Pete
> > > > > > >
> > > > > > > Pete Massiello
> > > > > > > iTech Solutions
> > > > > > > http://www.itechsol.com
> > > > > > >
> > > > > > > Add iTech Solutions on Facebook:
> > > > > > > http://www.facebook.com/group.php?gid=126431824120
> > > > > > > Add iTech Solutionw on LinkedIn:
> > > > > > > http://www.linkedin.com/groups?gid=2206093
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > -----Original Message-----
> > > > > > > From: midrange-l-bounces@xxxxxxxxxxxx
> > > > > > > [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Jack Kingsley
> > > > > > > Sent: Monday, February 01, 2010 10:56 AM
> > > > > > > To: Midrange Systems Technical Discussion
> > > > > > > Subject: Re: Blade and B6000414 error
> > > > > > >
> > > > > > > Initial load of OS.
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > On Mon, Feb 1, 2010 at 10:35 AM, Pete Helgren <Pete@xxxxxxxxxx>
> > > > wrote:
> > > >
> > > > > > > > Jack,
> > > > > > > >
> > > > > > > > As you probably know, that is a media read error which doesn't
> > > quite
> > >
> > > > > add
> > > > >
> > > > > > > > up if it was done reading the media.  Is this an initial load of
> > > the
> > >
> > > > > OS?
> > > > >
> > > > > > > > An upgrade?
> > > > > > > >
> > > > > > > > I am not familiar enough with the OS loading procedure to know if
> > > the
> > >
> > > > > > > > media error is with the CD or now it can't be read from disk.
> > > > > > > >
> > > > > > > > Perhaps a call to IBM support?  I saw one APAR but it had to do
> > > with
> > >
> > > > a
> > > >
> > > > > > > > network install, which doesn't apply.
> > > > > > > >
> > > > > > > > Pete
> > > > > > > >
> > > > > > > >
> > > > > > > > Jack Kingsley wrote:
> > > > > > > >
> > > > > > > >
> > > > > > > > > After loading the B2924_02 cd and then taking an option 2(no more
> > > > > > > > > installation media)  the system hangs with IPL step B6000414, any
> > > > > > > > > suggestions.
> > > > > > > >  --
> > > > > > > > This is the Midrange Systems Technical Discussion (MIDRANGE-L)
> > > > mailing
> > > >
> > > > > > > list
> > > > > > >
> > > > > > >
> > > > > > > > To post a message email: MIDRANGE-L@xxxxxxxxxxxx
> > > > > > > > To subscribe, unsubscribe, or change list options,
> > > > > > > > visit: http://lists.midrange.com/mailman/listinfo/midrange-l
> > > > > > > > or email: MIDRANGE-L-request@xxxxxxxxxxxx
> > > > > > > > Before posting, please take a moment to review the archives
> > > > > > > > at http://archive.midrange.com/midrange-l.
> > > > > > > --
> > > > > > > This is the Midrange Systems Technical Discussion (MIDRANGE-L)
> > > mailing
> > >
> > > > > list
> > > > >
> > > > > > > To post a message email: MIDRANGE-L@xxxxxxxxxxxx
> > > > > > > To subscribe, unsubscribe, or change list options,
> > > > > > > visit: http://lists.midrange.com/mailman/listinfo/midrange-l
> > > > > > > or email: MIDRANGE-L-request@xxxxxxxxxxxx
> > > > > > > Before posting, please take a moment to review the archives
> > > > > > > at http://archive.midrange.com/midrange-l.
> > > > > > >
> > > > > > >
> > > > > > > --
> > > > > > >  This is the Midrange Systems Technical Discussion (MIDRANGE-L)
> > > > mailing
> > > >
> > > > > > > list
> > > > > > > To post a message email: MIDRANGE-L@xxxxxxxxxxxx
> > > > > > > To subscribe, unsubscribe, or change list options,
> > > > > > > visit: http://lists.midrange.com/mailman/listinfo/midrange-l
> > > > > > > or email: MIDRANGE-L-request@xxxxxxxxxxxx
> > > > > > > Before posting, please take a moment to review the archives
> > > > > > > at http://archive.midrange.com/midrange-l.
> > > > > --
> > > > >  This is the Midrange Systems Technical Discussion (MIDRANGE-L)
> mailing
> > > > > list
> > > > > To post a message email: MIDRANGE-L@xxxxxxxxxxxx
> > > > > To subscribe, unsubscribe, or change list options,
> > > > > visit: http://lists.midrange.com/mailman/listinfo/midrange-l
> > > > > or email: MIDRANGE-L-request@xxxxxxxxxxxx
> > > > > Before posting, please take a moment to review the archives
> > > > > at http://archive.midrange.com/midrange-l.
> > > > --
> > > >  This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
> > > > list
> > > > To post a message email: MIDRANGE-L@xxxxxxxxxxxx
> > > > To subscribe, unsubscribe, or change list options,
> > > > visit: http://lists.midrange.com/mailman/listinfo/midrange-l
> > > > or email: MIDRANGE-L-request@xxxxxxxxxxxx
> > > > Before posting, please take a moment to review the archives
> > > > at http://archive.midrange.com/midrange-l.
> > > --
> > > Kirk
> > > --
> > >  This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
> > > list
> > > To post a message email: MIDRANGE-L@xxxxxxxxxxxx
> > > To subscribe, unsubscribe, or change list options,
> > > visit: http://lists.midrange.com/mailman/listinfo/midrange-l
> > > or email: MIDRANGE-L-request@xxxxxxxxxxxx
> > > Before posting, please take a moment to review the archives
> > > at http://archive.midrange.com/midrange-l.
> --
>  This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
> list
> To post a message email: MIDRANGE-L@xxxxxxxxxxxx
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/mailman/listinfo/midrange-l
> or email: MIDRANGE-L-request@xxxxxxxxxxxx
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/midrange-l.