Cache battery error and 1011 840D SRC

[Vern Hamberg <vhamberg@xxxxxxxxxxx>]

 Hi - need some counsel. We have a 270 with a 2763 RAID card. It 
reported the battery in error - it was replaced maybe in April. It 
reports 142 days used, 0 to error. That seemed really strange to be so 
short.

I thought I'd just take it out and put the card back in. The first time, 
I didn't disconnect the battery pack. When I started the machine, I got 
a 1011 804D SRC, which is something about a VPD mismatch - looking 
farther, I see it is about processor 4 - this doesn't have more than 1 
processor.

Now I did disconnect the cable to the card - there are two connections 
there - I reconnected to the connector nearer the end of the card, at 
the back of the machine. I actually forget which it was in - should it 
be on the connector more toward the center of the card? Only one cable, 
by the way.

So do we maybe have a bad 2763? Or just a bad battery pack and have to 
get another?

When I get the 1011 840D I have just pressed the white power button, and 
it proceeds nicely to IPL and starts everything - albeit VERRRRY slowly!

Thanks for any help
Vern