RE: TCP/IP Trace

["Jeffry A. Kennedy" <jkennedy@xxxxxxxxxxxxx>]

Trace rout shows the correct stuff going to my LPAR and get no response on the Target Box. I couldn't find LSLOOKUP on my box (V5.4) 

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of rob@xxxxxxxxx
Sent: Monday, September 27, 2010 12:05 PM
To: Midrange Systems Technical Discussion
Subject: RE: TCP/IP Trace

Command     Library     Text 
TRACEROUTE  QSYS        Trace TCP/IP Route
NSLOOKUP    QSYS        Start NSLOOKUP Query

Use both of these. 


Rob Berendt
--
Group Dekko
Dept 1600
Mail to:  2505 Dekko Drive
          Garrett, IN 46738
Ship to:  Dock 108
          6928N 400E
          Kendallville, IN 46755
http://www.dekko.com





From:   "Pete Massiello" <pmassiello-ml@xxxxxxxxxxxx>
To:     "'Midrange Systems Technical Discussion'" 
<midrange-l@xxxxxxxxxxxx>
Date:   09/27/2010 12:35 PM
Subject:        RE: TCP/IP Trace
Sent by:        midrange-l-bounces@xxxxxxxxxxxx



Did they change the gateway address at the target location?  Check to 
insure
that (CFGTCP take option 2) the default gateway is pointing to the address
for that router (Network people will tell you that address).

Pete Massiello
iTech Solutions
http://www.itechsol.com

Add iTech Solutions on Facebook:
http://www.facebook.com/group.php?gid=126431824120
Add iTech Solutions on LinkedIn: 
http://www.linkedin.com/groups?gid=2206093


-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Jeffry A. Kennedy
Sent: Monday, September 27, 2010 11:27 AM
To: 'Midrange Systems Technical Discussion'
Subject: TCP/IP Trace

My 2 iSeries stopped talking to each other on Friday. I can bing from from
my target box to the primary, but not the other way. I can get to the LPAR
on the target box. How do I do a trace from the iSeries ?
Our network people were doing stuff on the routers in the building where 
the
target box is located. They are on different sub-nets.