Michael,
You must be kidding about the lamp. Thanks for the other link though,
looks like it just might fit the bill here and for $25 it might be worth
it .... I'm off to the store now.
Rich
--------------------------------------------------------------------------
On 12/28/2010 12:41 PM, Michael Ryan wrote:
[1]
http://www.radioshack.com/product/index.jsp?productId=3161893
and
[2]
http://www.radioshack.com/product/index.jsp?productId=4385734 ... which is
just cool.
On Tue, Dec 28, 2010 at 12:27 PM, Rich Loeber [3]<rich@xxxxxxxxx> wrote:
Mark,
Thanks for the suggestion. I had thought of that, but wasn't sure that
it
was a viable option. Unfortunately, the nearest Office Depot (actually a
Staples) is more than an hour away. Maybe I can find something at the
local Radio Shack?
Rich
--------------------------------------------------------------------------
On 12/28/2010 12:16 PM, Mark Walter wrote:
Run to Office Depot and by a $50 switch and see if it works. If it does,
cascade the switch to the hub. Might not do much for you speed, but the
Ethernet adapter will at least sense a switch.
Mark D. Walter
Business to Business Data Integration Specialist
Certified IBM System I Specialist
Paragon Consulting Services, Inc.
[[4]1]mwalter@xxxxxxxxxxxxxxx
717-764-7909 Ext. (1)26
-----Original Message-----
From: [[5]2]midrange-l-bounces@xxxxxxxxxxxx [[3]mailto:
[6]midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Rich Loeber
Sent: Tuesday, December 28, 2010 12:11 PM
To: Midrange Systems Technical Discussion
Subject: Power System vs. The Hub
Just installing my first Power i and I've run into a snag. I am
installing a Power 6 8203-E4A but the ethernet line will not vary on.
IBM
support is recommending that I replace the hubs that run the office
network with switches because the ethernet card in the Power 6 is not
compatible with a connection to a hub. The hub I'm using is a 10/100
dual
speed Office Connect from 3 Com and has been in use here for about 10
years. Our trusty old i5 520 running V5R3 gets along with it just fine.
Has anyone had any experience with getting the Power 6 to work in an all
hub environment? This is pretty foreign to me. I don't want to lay out
money for a new office network topology if I don't have to.
Rich Loeber
Kisco Information Systems
[1][4][7]
http://www.kisco.com
SDG
References
Visible links
1. [5][8]
http://www.kisco.com/
References
Visible links
1. [9]mailto:mwalter@xxxxxxxxxxxxxxx
2. [10]mailto:midrange-l-bounces@xxxxxxxxxxxx
3. [11]mailto:midrange-l-bounces@xxxxxxxxxxxx
4. [12]
http://www.kisco.com/
5. [13]
http://www.kisco.com/
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: [14]MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: [15]
http://lists.midrange.com/mailman/listinfo/midrange-l
or email: [16]MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at [17]
http://archive.midrange.com/midrange-l.
References
Visible links
1.
http://www.radioshack.com/product/index.jsp?productId=3161893
2.
http://www.radioshack.com/product/index.jsp?productId=4385734
3. mailto:rich@xxxxxxxxx
4. mailto:1]mwalter@xxxxxxxxxxxxxxx
5. mailto:2]midrange-l-bounces@xxxxxxxxxxxx
6. mailto:midrange-l-bounces@xxxxxxxxxxxx
7.
http://www.kisco.com/
8.
http://www.kisco.com/
9. mailto:mwalter@xxxxxxxxxxxxxxx
10. mailto:midrange-l-bounces@xxxxxxxxxxxx
11. mailto:midrange-l-bounces@xxxxxxxxxxxx
12.
http://www.kisco.com/
13.
http://www.kisco.com/
14. mailto:MIDRANGE-L@xxxxxxxxxxxx
15.
http://lists.midrange.com/mailman/listinfo/midrange-l
16. mailto:MIDRANGE-L-request@xxxxxxxxxxxx
17.
http://archive.midrange.com/midrange-l
midrange.com
