Re: strqsh rexec command question

[rob@xxxxxxxxx]

Vern,

If there is no rexec running on that PC one should get:
rexec: 001-2245 Error found issuing command to remote host 
gdspc74.dekko-1.
A remote host refused an attempted connect operation. 

If it cannot find the PC by IP address you should get:
rexec: 001-2246 Host 10.10.1.123 cannot be found.

I would try pinging it from the i itself.

if the ping fails:
- verify the IP address
- verify that the reason the IP address works from your PC and not the i 
is not because
+ your pc is on some vpn, different subnet, etc.
- from where the ping works try:
tracert xxx.xxx.xxx.xxx
- from the i try
traceroute 'xxx.xxx.xxx.xxx'
Spelling of that command varies by platform.

You may have to change some routings or whatnot on your i.  Let us know 
before we give you TMI.

i commands above were ran on 7.1 of i.
My PC is running 7.1 of IBM Access for i.  I'm not finding that service 
running on there.  I thought I used to have it.  I don't know if the 
upgrade killed it or what.


Rob Berendt