Re: DCM password issues V6R1

["Mark S. Waterbury" <mark.s.waterbury@xxxxxxxxxxxxx>]

You REALLY should be opening a PMR for this kind of problem.

> On 1/27/2011 5:33 PM, Chris Bipes wrote:
> I am working on setting up a new Power 7 720 at V6R1M1.  I had DCM setup
> with a local CA and then generated a SSL cert for the application
> servers.  It was working for Telnet etc.  Now after applying group
> PTF's, my SSL stopped working.  I can download and install the cert
> using iSeries Navigator and put it into the local CA on my PC.  But when
> I verify the SSL connection, it fails across the board.  Going back into
> DCM I can verify the SSL cert with no issues.  The error returned is
> 10061 - The system was contacted, but refused the connection request.
> See CWBCO1049 for additional information.  I can see that there are no
> SSL listening ports for the servers, 9470-9479 are all not listing.  992
> is listening for Telnet but refuses the connection with 25406 - An IO
> error occurred on a data read or write.
>
> I ran in to this a long time ago and found that the password was somehow
> corrupted.  Well I am able to log in to the certificate stores but I
> cannot change the password.  Does anyone know the PTF to fix this.  My
> searches are coming up empty.