RE: using "mv" qsh command and qntc folders

["tim" <tim.dclinc@xxxxxxxxx>]

156029 is a directory within claims. I want to move the entire directory
from .5 to .61. When I try

Mv '/tmp/dir1' '/tmp/dir2' 

It works fine. 

I've don't a wrklnk on both the .5 and .61 path and they show up fine. So I
know my path names are ok. 

I was wondering if there is a restriction when trying to move a folder from
1 system to another if both systems are not located on the iseries...



-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Mark S. Waterbury
Sent: Saturday, April 09, 2011 1:36 PM
To: Midrange Systems Technical Discussion
Subject: Re: using "mv" qsh command and qntc folders

Hi, Tim:

Are you sure those are not directories?  You could try this:

mv /qntc/11.0.0.5/claims/156029/* /qntc/11.0.0.61/data/ClaimArchive/156029/*

Or, try using the OS/400 MOV command from an OS/400 command line, rather 
than "mv" from within Qshell .. you should at least get better error 
messages.  And, you can prompt the MOV command (by pressing F4).

Mark

> On 4/9/2011 9:16 AM, tim.dclinc wrote:
> mv '/qntc/11.0.0.5/claims/156029'
'/qntc/11.0.0.61/data/ClaimArchive/156029'