Re: ASMI ?

[DrFranken <midrange@xxxxxxxxxxxx>]

No crossover cable required as the ports are GbE. All compliant GbE 
ports have 'auto-crossover' built in per the specifications so cross 
over cables are fast becoming irrelevant.  Oddly though, since 
auto-cross is in there, the use of a cross-over cable also works! :-)

From one of my presentations the IP Addresses are:
POWER5 systems
Service processor A
HMC1 192.168.2.147/24
HMC2 192.168.3.147/24
Service processor B (if installed)
HMC1 192.168.2.146/24
HMC2 192.168.3.146/24

POWER6 and POWER7 systems
Service processor A
HMC1 169.254.2.147/24
HMC2 169.254.3.147/24
Service processor B (if installed)
HMC1 169.254.2.146/24
HMC2 169.254.3.146/24

 - Larry "DrFranken" Bolhuis

On 5/26/2011 8:37 AM, Jack Kingsley wrote:
> *This message was transferred with a trial version of CommuniGate(r) Pro*
> Does anyone have the IP's for POWER7/6/5 for ASMI, also, does this require a
> cross over cable.