Re: FTP weirdness

[Scott Klement <midrange-l@xxxxxxxxxxxxxxxx>]

SJL,

The CCSID of the new file is being calculated from the ASCII CCSID that 
you provided on the command.

you state that you are doing this:

    FTP CCSID(*DFT)

If you look at the help behind that CCSID parameter, you'll see this:

     *DFT
         The CCSID value 00819 (ISO 8859-1 8-bit ASCII) is used.

So *DFT = 819.  The assumption is being made that the CCSID of the ASCII 
file is 819, and therefore, you want to use the EBCDIC value that 
corresponds to 819...  which is 500.

There are three solutions:

1)  (BAD SOLUTION) You can specify FTP CCSID(437).  This tells the
       FTP client that the ASCII file is in CCSID 437 (which was an
       MS-DOS code page for PCs in the USA.)  When you use 437, the
       system will choose 37 on the EBCDIC side.

       This is a bad solution because, since the advent of Windows 95,
       no PC uses CCSID 437. If they send any variant characters,
       this is likely to create a mistranslation.


2)  (RECOMMENDED)  Type the following FTP command before you do
        your MGET.  (Or, if this is a script, add it to the script
        before the MGET):

         LOCSITE CRTCCSID *USER

        This tells the FTP client that you want to create new files
        using the default CCSID of your job.  In your examples, that
        would be CCSID 37.

        (Confusingly *USER means the job ccsid.  I would've expected
         them to use *JOB for the job ccsid!)

3)  (RECOMMENDED) Pre-create the file.  This also allows you to set
        other things, such as an external definition for the file.
        However, this option is not practical when you don't know
        the filename in advance.


Hope that's clear?

On 8/26/2011 5:24 PM, sjl wrote:
> All -
>
> I apologize for any misunderstanding, as I now understand that CHGFTPA only
> affects the Power system when it is an FTP server, not as a client.  To
> clear up any confusion, the Power is the client, and SI is the server.  I
> was running the FTP session from my interactive job - see the attributes of
> my PC5250 session from my original posting.
>
> The FTP command specified the default values [CCSID(*DFT) and
> TBLFTPIN(*CCSID)].
>
> The file on the Power side did NOT exist before I performed the FTP MGET
> command - it was created with CCSID(500) by the system when it was received.
>
> Here is what the DDS (generated by the system) in QTEMP/QTMFTPDDS looked
> like:
>
> 0001.00      A                                      CCSID(500)
> 0002.00      A          R SALESORDER
> 0003.00      A            SALESORDER  1118A
>
> Regards,
> sjl