Re: 3027 memory shows up as 0MB

[DrFranken <midrange@xxxxxxxxxxxx>]

Wellll there's yer problem.  You need to get FC #3026 memory as the 
largest supported there.  They must be installed in pairs.

- Larry "DrFranken" Bolhuis

On Friday, October 07, 2011 10:43:56 AM, Steve Richter wrote:
> *This message was transferred with a trial version of CommuniGate(r) Pro*
> 2248 processor:
>
> Opt  Resource        Type-model  Status
> Text
>       CEC01            9406-270   Operational           Main Card
> Enclosure
>       PN01             247D       Operational           System Control
> Panel
>       MP01             2249-000   Operational           System Processor
> Card
>       PV02             2248-001   Operational           Processor Capacity
> Card
>       PV01             1517-001   Operational           Interactive
> Card
>       SP01             2249       Operational           Service Processor
> Card
>       BCC01                       Operational           Bus
> Adapter
>       BCC02                       Operational           Bus
> Adapter
>         MS01           3022-000   Operational           128MB Main Storage
> Card
>         MS02           3022-000   Operational           128MB Main Storage
> Card
>         MS03           3027-000   Not detected          0MB Main Storage
> Card
>         MS04           3027-000   Not detected          0MB Main Storage
> Card
>
>
> On Fri, Oct 7, 2011 at 10:28 AM, DrFranken<midrange@xxxxxxxxxxxx>  wrote:
>
> > What processor feature do you have? This memory is only good for FC
> > #2434 and FC #2454 processors.  Because you did not mention 'Memory
> > Board' it sounds like you put the memory on the planar board. The two
> > FCs above have all memory on a memory riser board so I suspect you have
> > a different model and need different memory.
> >
> >      - Larry "DrFranken" Bolhuis
> >
> > On 10/7/2011 9:44 AM, Steve Richter wrote:
> > > I just installed a pair of 3027 memory DIMMs in an iSeries 270. The
> > system
> > > IPLs ok, but no additional memory is detected.  Status in WRKHDWRSC is
> > "Not
> > > detected".
> > >
> > > The two DIMMs were placed in the C-D slots. Right next to the other two
> > > DIMMs in the system.
> > >
> > > Does this mean the memory is faulty?
> > >
> > > thanks,
> > >
> > >
> > >                           Work with Processor
> > > Resources
> > >
> > >
> > > Opt  Resource        Type-model  Status
> > > Text
> > >        CEC01            9406-270   Operational           Main Card
> > > Enclosure
> > >        PN01             247D       Operational           System Control
> > > Panel
> > >        MP01             2249-000   Operational           System Processor
> > > Card
> > >        PV02             2248-001   Operational           Processor
> > Capacity
> > > Card
> > >        PV01             1517-001   Operational           Interactive
> > > Card
> > >        SP01             2249       Operational           Service Processor
> > > Card
> > >        BCC01                       Operational           Bus
> > > Adapter
> > >        BCC02                       Operational           Bus
> > > Adapter
> > >          MS01           3022-000   Operational           128MB Main
> > Storage
> > > Card
> > >          MS02           3022-000   Operational           128MB Main
> > Storage
> > > Card
> > >          MS03           3027-000   Not detected          0MB Main Storage
> > > Card
> > >          MS04           3027-000   Not detected          0MB Main Storage
> > > Card
> > >
> > > Resource name  . . . . . . . :   MS03
> > > Text . . . . . . . . . . . . :   0MB Main Storage Card
> > > Type-model . . . . . . . . . :   3027-000
> > > Serial number  . . . . . . . :   28-2099027
> > > Part number  . . . . . . . . :   0000004N6547
> > >
> > > Physical location:
> > >    Frame ID                          1
> > >    Card position                     MB1C
> > --
> > This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
> > To post a message email: MIDRANGE-L@xxxxxxxxxxxx
> > To subscribe, unsubscribe, or change list options,
> > visit: http://lists.midrange.com/mailman/listinfo/midrange-l
> > or email: MIDRANGE-L-request@xxxxxxxxxxxx
> > Before posting, please take a moment to review the archives
> > at http://archive.midrange.com/midrange-l.