Re: Forcing a specific tray

["Jim Franz" <franz400@xxxxxxxxxxxx>]

I would use the *HP4 listed in IBM's Knowledgebase doc

https://www-304.ibm.com/support/docview.wss?uid=nas1cc6ee2005999a36d862569c100796da4

btw - you can get to these docs by google "ibm information on printers from 
xerox" (or shorter "iseries xerox printer")

The master doc of all manufacturers "iseries information on printers 
various"

https://www-304.ibm.com/support/docview.wss?uid=nas1b44a2cf4ba778d83862568250053649f

I don't let people buy printers without checking here first (if I have a say 
in it..)

What is your spool file size (width & length) odd length or width can cause 
this issue. If your report is 107 characters wide, define spool at 132, not 
107..  Post the ovrprtf specs if needed.

Jim Franz

----- Original Message ----- 
From: "John McKee" <jmmckee@xxxxxxxxxxxxxx>
To: "Midrange Systems Technical Discussion" <midrange-l@xxxxxxxxxxxx>
Sent: Tuesday, November 01, 2011 5:40 PM
Subject: Forcing a specific tray


> I set up a DEVD for a Xerox 5135.  But, spool files sent to this printer 
> cause the printer to request a paper change in the bypass tray.
>
> I don't know if this is normal for this printer.  But, easiest work-around 
> is to use a WSCST to force a tray other than bypass.
>
> Thus this question:
>
> What do I use for the device type parameter of the RTVWSCST command?
>
> John McKee
> --
> This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing 
> list
> To post a message email: MIDRANGE-L@xxxxxxxxxxxx
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/mailman/listinfo/midrange-l
> or email: MIDRANGE-L-request@xxxxxxxxxxxx
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/midrange-l.