|
Tell you this, we currently have a 3576 with 6 fiber drives in it. 3 are
dedicated to 1 lpar of Linux running TSM. The other 3 are shared between
4 lpars of i - each with their own fiber card. All attached to a switch.
We don't have to vary on/off or anything else. We just have to ensure
that only 3 lpars of i try to access the library at once. BRMS keeps
track of which lpar used what tape and so on. You have to have the
networking feature configured for this.
I was hoping for an LTO5 upgrade but it looks like we will be going to a
LTO4 upgrade. Much cheaper and allows us to faze in tape cartridge
upgrades since LTO4 can both read and write LTO3 tapes. My boss is
chasing down the numbers but currently looking at replacing several SCSI
attached 3573 libraries with your configuration. Everything will be
connected through a switch. Our BP is getting us what we'll need. One of
these people has his name on 9 redbooks.
Rob Berendt
--
IBM Certified System Administrator - IBM i 6.1
Group Dekko
Dept 1600
Mail to: 2505 Dekko Drive
Garrett, IN 46738
Ship to: Dock 108
6928N 400E
Kendallville, IN 46755
http://www.dekko.com
From: "Graap, Kenneth" <Kenneth.Graap@xxxxxxxxxxxxx>
To: "Midrange Systems Technical Discussion (midrange-l@xxxxxxxxxxxx)"
<midrange-l@xxxxxxxxxxxx>,
Date: 07/09/2012 06:14 PM
Subject: Connecting a 3753 (TS3200 tape library) to 2 IBMi systems
Sent by: midrange-l-bounces@xxxxxxxxxxxx
I have a TS3200 LTO4 Tape Library (3573). It has dual tape drives in it (a
4U configuration)
It looks like each Tape Drive has 2 fibre ports.
Currently one port for each Tape Drive is directly attached to a Power6
IBMi system using a couple 2844 IOP's and 280D Fibre controller cards
(Note: No fibre switch is being used)
I want to attach a second IBMi, a Power7 system, to the TS3200 via a
couple 5735 Fibre Channel Adaptor cards connected through a generic Fibre
Switch.
My intent is to plug the 2nd fiber ports for each tape drive into the
fibre switch along with the 2 5735 interface cards with the hope that the
Power7 system will be able to access the tape drives that way. I was also
hoping that I could then toggle the tape drives between the two IBMi
systems.
Do you think this is possible? I haven't been able to find any
documentation describing this kind of configuration.
Reply or Forwarded mail from: Kenneth E Graap
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.
As an Amazon Associate we earn from qualifying purchases.
This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].
Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.