If you every have to make fully composed AFP data, you need to look at
CRTAFPDTA.
-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Alan Shore
Sent: Wednesday, September 26, 2012 4:49 PM
To: Midrange Systems Technical Discussion
Subject: RE: AFPDS printer with a pagseg
Yep - that was it
THANKS (MUCH)
Alan Shore
Programmer/Analyst, Direct Response
E:AShore@xxxxxxxx
P:(631) 200-5019
C:(631) 880-8640
"If you're going through Hell, keep going" - Winston Churchill
-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Charles Wilt
Sent: Wednesday, September 26, 2012 4:47 PM
To: Midrange Systems Technical Discussion
Subject: Re: AFPDS printer with a pagseg
My trusty IBM AS-400 Printing V Redbook says "AFP resources are elements
that PSF can use at print time. The resources are referenced in the
spool, not included in the spooled file themselves."
My trusty IBM AS-400 Printing V Redbook says "If the AFPDS spooled file
uses any resources, such as overlays, page segments or host resident
fonts, these resources must exist on the target system if they are to be
included in the printed output. The AS/400 does not insert resources in
the spooled file before sending the file to the target system."
This is with respect to remote writers going from AS/400-->AS/400...
But I suspect the same thing applies to SNDNETSPLF
Charles
On Wed, Sep 26, 2012 at 4:25 PM, Charles Wilt <charles.wilt@xxxxxxxxx>
wrote:
Something is tickling the back of my mind....
AFP resources aren't embedded in the spool file....they are sent to
the printer by the spool system...
I think when you print AFP documents on another system you need to
make the the resources are already there...
Charles
On Wed, Sep 26, 2012 at 4:03 PM, Alan Shore <ashore@xxxxxxxx> wrote:
Good afternoon everyone
Before I forget, we are on V5r4 on both systems (see later).
I have created a print file using a Page Segment on one system and
this prints perfectly on that system.
When I use the command SNDNETSPLF with the parameter DTAFMT set to
*ALLDATA and send that same spool file to another system and print that
same spool file on the other system, the page segment does NOT print,
although the rest of the print file does.
Is there something that I am missing?
Is there some way that will tell me that the page segment is on the
spool file?
Thanks in advance
Alan Shore
Programmer/Analyst, Direct Response
E:AShore@xxxxxxxx
P:(631) 200-5019
C:(631) 880-8640
"If you're going through Hell, keep going" - Winston Churchill
Disclaimer: This message contains confidential information and is
intended only for the individual named. If you are not the named
addressee you should not disseminate, distribute or copy this e-mail.
Please notify the sender immediately by e-mail if you have received this
e-mail by mistake and delete this e-mail from your system. E-mail
transmission cannot be guaranteed to be secure or error-free as
information could be intercepted, corrupted, lost, destroyed, arrive
late or incomplete, or contain viruses. The sender therefore does not
accept liability for any errors or omissions in the contents of this
message, which arise as a result of e-mail transmission. If verification
is required please request a hard-copy version. Any views or opinions
presented are solely those of the author and do not necessarily
represent those of the company.
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L)
mailing list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To
subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take
a moment to review the archives at
http://archive.midrange.com/midrange-l.
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe,
unsubscribe, or change list options,
visit:
http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a
moment to review the archives at
http://archive.midrange.com/midrange-l.
midrange.com
