Re: IMAGE Catalogs and NFS

ok, so my errors are because of that issue then I am sure.


On Fri, Apr 4, 2014 at 4:33 PM, Jim Oberholtzer <midrangel@xxxxxxxxxxxxxxxxx

wrote:

I did not answer the first question. Using the LAN/WAN is possible but you
can't use the same interfaces (ports on the Ethernet card) as you have any
other kind of traffic on. That's because this IP stack is not running in
IBM i, it's running in the LIC. Two separate and distinct IP stacks.

--
Jim Oberholtzer
Chief Technical Architect
Agile Technology Architects


-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Jack Kingsley
Sent: Friday, April 04, 2014 3:02 PM
To: Midrange Systems Technical Discussion
Subject: Re: IMAGE Catalogs and NFS

Jim, is this a requirement if the systems are on the lan/wan.

How is the service tool server configured since this will not be on a
system
with lan console, this system is on HMC.


On Fri, Apr 4, 2014 at 2:01 PM, Jim Oberholtzer <
midrangel@xxxxxxxxxxxxxxxxx

wrote:

If you're PTF/Group host partition is on the same box as the other
partitions use the VLAN over the backplane. Make sure to heed the
recommendations regarding frame sizes, they are not really
recommendations, more like requirements.

Since we are mostly using 4 port Ethernet cards now; If the systems
are co-located in the same room, I have been using one of the empty
ports on each system and directly connecting a cable between the
systems (no switch/router/hub etc. device) then configuring the
connection the same way I do the VLAN. We have been finding it to be
nearly as fast as the backplane VLAN. I almost always use a Cat6 cable

but I don't think that

really matters. Now you can use the same NFS technique between systems
in
the same location.

It works well over a LAN/WAN but is slower due to the overhead of the
LAN/WAN.

--
Jim Oberholtzer
Chief Technical Architect
Agile Technology Architects


-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of rob@xxxxxxxxx
Sent: Friday, April 04, 2014 12:12 PM
To: Midrange Systems Technical Discussion
Subject: Re: IMAGE Catalogs and NFS

I keep thinking about trying this. I have 11 lpars. But when I get
started I'm normally under some crunch. Or the NFS is recommended
over vlan and that would be a local lpar to that frame. Well, I
rarely bring down just one lpar on that rack without bringing them all
down and that can be a problem if they're too dependent on each other.

Still, I need to give this more effort.

Rob Berendt
--
IBM Certified System Administrator - IBM i 6.1 Group Dekko Dept 1600
Mail
to: 2505 Dekko Drive
Garrett, IN 46738
Ship to: Dock 108
6928N 400E
Kendallville, IN 46755
http://www.dekko.com





From: Jack Kingsley <iseriesflorida@xxxxxxxxx>
To: Midrange Systems Technical Discussion <MIDRANGE-L@xxxxxxxxxxxx>
Date: 04/04/2014 11:50 AM
Subject: IMAGE Catalogs and NFS
Sent by: midrange-l-bounces@xxxxxxxxxxxx



Any input to how promising this is on 6.1 and 7.1 Looking to test
this out and wanted to see how well it works. Can these images be on
a PC as well or must they be on NFS IBM I.
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe,
unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take
a moment to review the archives at
http://archive.midrange.com/midrange-l.


--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe,
unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take
a moment to review the archives at
http://archive.midrange.com/midrange-l.


--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe,
unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take
a moment to review the archives at
http://archive.midrange.com/midrange-l.

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe,
unsubscribe,
or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a
moment to review the archives at http://archive.midrange.com/midrange-l.


--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.