Re: IBM i Access 7.1 - cannot get IP address using RPG

[Gqcy <gmufasa01@xxxxxxxxx>]

Kevin,
that example program is pulling the IP address from the Device 
Description...
if you look at that device description (via DSPDEVD) does it show a ip 
address?

WIN7 and WIN8 do have settings to lock down remote command, not sure 
what they are.

I can say that I currently run client access 7.1 (latest service pack!)
and I return a ip address for my client access session.





On 8/8/2014 10:10 AM, kevin wrote:
> Hi,
>
> So I installed IBM i client access 7.1 from the system onto an XP
> machine. I am now unable to obtain the IP of the pc in question from my
> application.
>
> This has worked for years on the older versions right up to 6.1..
>
> I've tried this program as a
> test..http://www.itjungle.com/mpo/mpo011702-story02.html
>
> It works fine on my mac and on older client access versions..this is
> critical to the application I have written for my client and now it no
> longer works..along with RUNRMTCMD on Win7..what are IBM doing...this
> sort of stuff used to work out of the box...
>
> Anybody solved or come across this..are there any setting that need
> adjusting?
>
> Regards
>
> Kevin