John,
Well, "OK" is not a good way to put it. The system is still stable and
running but you have some PTFs that need to still be applied. "not applied"
is a status that needs to be corrected. My guess is since the PTFs were in
DG1 primarily that they could not apply while the HTTP servers were active.
A second guess is you have a missing PTF or two.
Look at each of the PTFs that did not apply and see if there are special
instructions or if there are Co-Req and/or Pre-Req PTFs. Sometimes there
are missing PTFs. Correct those and you should be back to where all the
groups are applied properly.
You might be able to do an apply delayed then IPL to get everything.
--
Jim Oberholtzer
Chief Technical Architect
Agile Technology Architects
-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of John
Allen
Sent: Wednesday, December 03, 2014 1:06 PM
To: MIDRANGE-L@xxxxxxxxxxxx
Subject: After installing Group PTF SF99610 it still shows as Not Installed
I installed Group PTF SF99610 on box running 6.1
Using a Image Catalog
After installing PTF and IPL (with no errors)
I did Display log for messages:
PTF installation process started.
Loading of PTFs started.
Loading of PTFs completed successfully.
Apply PTF started.
Applying of PTFs for product 5761999 completed successfully.
Applying of PTFs completed.
PTFs applied or removed during IPL.
WRKPTFGRP SF99610 shows:
SF99610 12122 Not Installed
SF99610 14197 Not installed
I use Option 5=Display (on SF99610 14197) and it shows:
PTF group . . . . . . . . : SF99610
Level . . . . . . . . . . : 14197
Status . . . . . . . . . . : Not installed
Target release . . . . . . : V6R1M0
Text . . . . . . : CUMULATIVE PTF PACKAGE C4197610
Type options, press Enter.
5=Display PTF details 6=Print cover letter 8=Dis
PTF Product
ID ID Release Status
SI20298 5722BZ1 V5R1M0 Temporarily applied
SI12985 5722BZ1 V5R1M0 Permanently applied
SI41571 5722IP1 V5R3M0 Temporarily applied
SI41237 5722IP1 V5R3M0 Temporarily applied
SI32682 5722IP1 V5R3M0 Permanently applied
SI29868 5722IP1 V5R3M0 Temporarily applied
SI18683 5722IP1 V5R3M0 Permanently applied
SI18598 5722IP1 V5R3M0 Permanently applied
SI18357 5722IP1 V5R3M0 Permanently applied
SI14201 5722IP1 V5R3M0 Permanently applied
SI11314 5722IP1 V5R3M0 Permanently applied
SI53140 5761DG1 V6R1M0 Not applied
SI51697 5761DG1 V6R1M0 Superseded
SI50788 5761DG1 V6R1M0 Not applied
SI48955 5761DG1 V6R1M0 Superseded
SI48953 5761DG1 V6R1M0 Superseded
SI48831 5761DG1 V6R1M0 Superseded
SI48793 5761DG1 V6R1M0 Superseded
SI48538 5761DG1 V6R1M0 Superseded
SI48237 5761DG1 V6R1M0 Superseded
SI47454 5761DG1 V6R1M0 Not applied
.
.
SI48163 5761JV1 V6R1M0 Not applied
SI48162 5761JV1 V6R1M0 Not applied
SI48156 5761JV1 V6R1M0 Not applied
SI48154 5761JV1 V6R1M0 Not applied
SI47178 5761JV1 V6R1M0 Not applied
SI42678 5761JV1 V6R1M0 Not applied
SI42677 5761JV1 V6R1M0 Temporarily applied
I do have some PTFs that show not applied but I think that's OK (Am I
correct?)
Am I missing something here?
Is there a step I have forgotten?
Thanks in advance for any assistance
John
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe, unsubscribe,
or change list options,
visit:
http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a
moment to review the archives at
http://archive.midrange.com/midrange-l.
midrange.com
