RE: HMC 5250 console, 132 column support

["Steinmetz, Paul" <PSteinmetz@xxxxxxxxxx>]

Rob,

Your referring to DSP01, correct.
My other devices that have 132 have a class of *VRT type 3477

Device description . . . . . . . . :   DSP01 
Option . . . . . . . . . . . . . . :   *BASIC
Category of device . . . . . . . . :   *DSP  
                                             
Device class . . . . . . . . . . . :   *LCL  
Device type  . . . . . . . . . . . :   3179  
Device model . . . . . . . . . . . :   2     
Port number  . . . . . . . . . . . :   0     
Switch setting . . . . . . . . . . :   0     


                   Sign On                                   
                               System  . . . . . :   PENCOR07
                               Subsystem . . . . :   QCTL    
                               Display . . . . . :   DSP01   
                                                             
User  . . . . . . . . . . . . . .                            
Password  . . . . . . . . . . . .                            

Paul

-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of rob@xxxxxxxxx
Sent: Tuesday, March 17, 2015 10:12 AM
To: Midrange Systems Technical Discussion
Subject: RE: HMC 5250 console, 132 column support

I wonder if I have to delete my system console and allow it to recreate?
Scary, but, hey, if I back it up I can always telnet to this system...

QAUTOCFG is '1' - On.
This is NOT a virtual device but I have plenty left for QAUTOVRT anyway.



Rob Berendt
--
IBM Certified System Administrator - IBM i 6.1 Group Dekko Dept 1600 Mail to:  2505 Dekko Drive
          Garrett, IN 46738
Ship to:  Dock 108
          6928N 400E
          Kendallville, IN 46755
http://www.dekko.com





From:   "Steinmetz, Paul" <PSteinmetz@xxxxxxxxxx>
To:     "'midrange-l@xxxxxxxxxxxx'" <midrange-l@xxxxxxxxxxxx>
Date:   03/17/2015 09:59 AM
Subject:        RE: HMC 5250 console, 132 column support
Sent by:        "MIDRANGE-L" <midrange-l-bounces@xxxxxxxxxxxx>



Rob,

Only 80 here.

iSeries Access for Windows
5770XE1 V7R1M0 Latest SP SI 55797

Paul

-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of 
rob@xxxxxxxxx
Sent: Tuesday, March 17, 2015 9:50 AM
To: midrange-l@xxxxxxxxxxxx
Subject: HMC 5250 console, 132 column support

Somewhere they must have added 132 column support for the HMC 5250 console 
because my COMMON requirement 318 was closed by Carl Novit.
However I can't seem to get 132 columns to work.
I am using IBM i Client Access Solutions 1.1.4 build 5063.
I created an HMC console session.  Communications, Configure says 27x132.
Uses this device:
Device description . . . . . . . . :   DSP010000
Device class . . . . . . . . . . . :   *LCL
Device type  . . . . . . . . . . . :   3179
Device model . . . . . . . . . . . :   2 

However DSPPFM is still only showing 80 columns.


Rob Berendt
--
IBM Certified System Administrator - IBM i 6.1 Group Dekko Dept 1600 Mail 
to:  2505 Dekko Drive
          Garrett, IN 46738
Ship to:  Dock 108
          6928N 400E
          Kendallville, IN 46755
http://www.dekko.com

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing 
list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe, 
unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a 
moment to review the archives at http://archive.midrange.com/midrange-l.