Easiest is *ADMIN server.
--
Jim Oberholtzer
Chief Technical Architect
Agile Technology Architects
-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of
Steinmetz, Paul
Sent: Monday, March 23, 2015 10:16 AM
To: 'Midrange Systems Technical Discussion'
Subject: RE: Confirming SSLv2 and SSLv3 usage, disabling
Rob,
I think so, but not sure.
Where do we look to see if configured?
Paul
-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of
rob@xxxxxxxxx
Sent: Monday, March 23, 2015 11:09 AM
To: Midrange Systems Technical Discussion
Subject: Re: Confirming SSLv2 and SSLv3 usage, disabling
Ok, maybe you found no usage, but that may not mean that you don't still
have it configured? Is that the issue?
Rob Berendt
--
IBM Certified System Administrator - IBM i 6.1 Group Dekko Dept 1600 Mail
to: 2505 Dekko Drive
Garrett, IN 46738
Ship to: Dock 108
6928N 400E
Kendallville, IN 46755
http://www.dekko.com
From: "Steinmetz, Paul" <PSteinmetz@xxxxxxxxxx>
To: "'Midrange Systems Technical Discussion'"
<midrange-l@xxxxxxxxxxxx>
Date: 03/23/2015 10:53 AM
Subject: Confirming SSLv2 and SSLv3 usage, disabling
Sent by: "MIDRANGE-L" <midrange-l-bounces@xxxxxxxxxxxx>
I was notified by our corporate security admin (via Nessus scan) that
SSLv2 and SSLv3 were still being used on the I and needed to be disabled.
20007
SSL Version 2
and 3 Protocol
Detection
Medium 10.5.2.5 TCP
21 No iSeries
I turned on the TRCINT per doc N1020594, left it run for 7 days, found no
usage of SSLv2 or SSLv3, only *TLSV1.0
http://www-01.ibm.com/support/docview.wss?uid=nas8N1020594
What am I missing here?
How and where do I confirm if SSLv2 or SSLv3 is still configured?
How do I disable?
Thank You
_____
Paul Steinmetz
IBM i Systems Administrator
Pencor Services, Inc.
462 Delaware Ave
Palmerton Pa 18071
610-826-9117 work
610-826-9188 fax
610-349-0913 cell
610-377-6012 home
psteinmetz@xxxxxxxxxx<mailto:psteinmetz@xxxxxxxxxx>
http://www.pencor.com/
midrange.com
