Re: RICHO Aficio SP5200DN: Margin alignment is off for 1 line at the top -- MIDRANGE-L

You can create two different device descriptions, one without WSCST, one
with

1. CRTDEVPRT DEVD(STANDARD) DEVCLS(*LAN) TYPE(3812) MODEL(1)
LANATTACH(*IP) PORT(9100)
FONT(11) PARITY(*NONE) STOPBITS(1) TRANSFORM(*YES) MFRTYPMDL(*RICOHSP5200S)
RMTLOCNAME('1.2.3.4') USRDFNOPT(*IBMSHRCNN) SYSDRVPGM(*IBMSNMPDRV)

2. CRTDEVPRT DEVD(SPECIAL) DEVCLS(*LAN) TYPE(3812) MODEL(1)
LANATTACH(*IP) PORT(9100) FONT(11) PARITY(*NONE) STOPBITS(1)
TRANSFORM(*YES) MFRTYPMDL(*RICOHSP5200S) RMTLOCNAME('1.2.3.4')
USRDFNOPT(*IBMSHRCNN) SYSDRVPGM(*IBMSNMPDRV) WSCST(*LIBL/RICOH5200)

Now you have two outqs, two device descriptions, one to print normal
margins, one to print special margins, or whatever customization you did in
the *WSCST. I often create multiple definitions for different drawers of a
multi-drawer printer.

If you have not done WSCST before there are many previous posts, plus IBM
has many docs - this one may help
https://www-304.ibm.com/support/docview.wss?uid=nas8N1019007
There is a pre-built form described PCL5UB04A and PCL5UB04B which describe
edge to edge printing (no margins)
I've done WSCST for Ricohs, but not for no-margin print.

If you have questions, or if this is not the answer needed let us know.
Jim Franz

On Wed, Sep 23, 2015 at 8:44 AM, Vidal, Peter <Peter.Vidal@xxxxxxxxxxxxxxx>
wrote:

I honestly do not know Jim. I know that this is a brand new printer, used
for the first time and only printing one type of forms so far (let's call
it "A-Forms"). I checked and there is no other job in our company printing
to that printer.

About the *WSCST object: does not this controls the way the printer will
behave in general, this may affect the existing way that the "A-Forms" are
being printed, right? I mean, if I specify 0 margins, it will misalign the
existing "A-Form"; they are currently printing fine.

Peter Vidal
Developer AS400 | P: 800-808-1902, x137210 | F: 813-884-2847

-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of
midrange
Sent: Wednesday, September 23, 2015 1:01 AM
To: 'Midrange Systems Technical Discussion'
Subject: RE: RICHO Aficio SP5200DN: Margin alignment is off for 1 line at
the top

A workstation customization object *wscst should handle this. You can have
multiple device descriptions defined for the same printer/ip - each with
their own outq.
Question - does this printer truly have an IPDS card?
Jim

This communication is intended only for the use of the individual or
entity named as the addressee. It may contain information which is
privileged and/or confidential under applicable law. If you are not the
intended recipient or such recipient's employee or agent, you are hereby
notified that any dissemination, copy or disclosure of this communication
is strictly prohibited. If you have received this communication in error,
please immediately notify CareCentrix Compliance Hot Line at (877)
848-8229 and notify the sender by electronic mail. Please expunge this
communication without making any copies. Thank you for your cooperation.
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.