Re: GIF or JPEG printing still struggling (PDF and PNG printing with AFPRSC)

Jack

I control the printed size using the *SIZE parameter of AFPRSC and the *MAPOPT that makes it fit - I don't have the code handy.

ImageMagick CAN adjust the size as well - haven't really tried that yet. And it can reduce the PNG to fewer colors. We're getting PNGs that are probably 32-bit - they don't need to be, but we've not done everything in that regards yet.

HTH
Vern

On 8/13/2016 8:08 PM, Jack Tucky wrote:

The new printer prints the PDF's directly from the i. There are sizing
issues with the JPG's.

Vern I do use Imagemagick to convert the PNG to GIF or JPG. Both are way
too big when they print, even though I asked the labelary web service to
send me 4x6 labels.

I have to go in now and see where the image size gets messed up.

On Sat, Aug 13, 2016 at 4:11 PM, Vernon Hamberg <vhamberg@xxxxxxxxxxxxxxx>
wrote:

Jack

If you can only get PNGs, look at ImageMagick - Scott Klement has binaries
for all you need to do PNG to GIF conversions - I'm doing it now.

The command to do it is simple - let me know if you need it, I'll send it
here.

Vern


On 8/12/2016 9:28 PM, Jack Tucky wrote:

It says ZPL to PNG but I thought there was a GIF option

They also sell the software to run the service in house. They were quick
to answer emails
http://labelary.com/service.html

On Aug 12, 2016, at 1:22 PM, Hatcher, Marianne <MHatcher@xxxxxxxxxxxx>

wrote:

Jack,
What is the web service that will translate a ZPL to a GIF? I can also
get a label in a ZPL format but didn't try that because I was going to be
printing the label on a laser printer rather than thermal and I expected
PDF or PNG to work. At this point, I will do whatever it takes to get
this thing to print!




www.pilotpen.us
Marianne Hatcher - Senior Systems Analyst
Office: (904) 645-9999 ext.1262
Pilot Corporation of America
3855 Regent Blvd, Jacksonville, Florida 32224 United States

This email and any files transmitted with it are confidential and
intended solely for the use of the individual or entity to whom they are
addressed. If you have received this email in error please notify the
system manager. This message contains confidential information and is
intended only for the individual named. If you are not the named addressee
you should not disseminate, distribute or copy this e-mail. Please notify
the sender immediately by e-mail if you have received this e-mail by
mistake and delete this e-mail from your system. If you are not the
intended recipient you are notified that disclosing, copying, distributing
or taking any action in reliance on the contents of this information is
strictly prohibited.
-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of
Jack Tucky
Sent: Friday, August 12, 2016 10:06 AM
To: Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>
Subject: Re: GIF or JPEG printing still struggling (PDF and PNG printing
with AFPRSC)

This is what we are trying to do also.

We get ZPL from Fedex though. We have a server in our building that they
provide.

I've already found some software/web service that will translate the ZPL
to a GIF

On Aug 12, 2016, at 8:03 AM, Hatcher, Marianne <MHatcher@xxxxxxxxxxxx>

wrote:

Michael,
I haven't tried that because I need to print the PDF (which is a FedEx
label) and a packing slip on the same page (we have a special type of paper
that has a peel off label on the top and a tear off packing slip at the
bottom). The label comes back from FedEx's API and we are producing the
packing slip through an external printer file. I wanted to use the AFPRSC
keyword within the same printer file that produces the packing list.

We are making this change because we currently have all of our FedEx
labels manually programmed and printed through TLAshford and are trying to
replace that with the label that comes back from the FedEx API. We were
able to do this for UPS labels because their labels come back as GIF and I
can get those to print using AFPRSC component id 22.

Another option that I have with FedEx is to have their labels returned
as PNG. I read that component id 65 is for PNG but that doesn't work for
me either.


www.pilotpen.us
Marianne Hatcher - Senior Systems Analyst
Office: (904) 645-9999 ext.1262
Pilot Corporation of America
3855 Regent Blvd, Jacksonville, Florida 32224 United States

This email and any files transmitted with it are confidential and
intended solely for the use of the individual or entity to whom they are
addressed. If you have received this email in error please notify the
system manager. This message contains confidential information and is
intended only for the individual named. If you are not the named addressee
you should not disseminate, distribute or copy this e-mail. Please notify
the sender immediately by e-mail if you have received this e-mail by
mistake and delete this e-mail from your system. If you are not the
intended recipient you are notified that disclosing, copying, distributing
or taking any action in reliance on the contents of this information is
strictly prohibited.
-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of
Michael Schutte
Sent: Thursday, August 11, 2016 11:09 PM
To: Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>
Subject: Re: GIF or JPEG printing still struggling

Marianne. Have you tried using the QImgCvtImg Api to convert the PDF
to a userascii spool file?

It doesn't create pcl spool file but remains as a PDF spool file. It
appears you are using Hp printers that can handle direct PDF printers.

I have posted code on using the QImgCvtImg api.

Sent from my iPhone

On Aug 11, 2016, at 1:08 PM, Hatcher, Marianne <MHatcher@xxxxxxxxxxxx>

wrote:

Vern,
We are on 7.2. I am getting the PDF image back from a FedEx API then
saving it to the IFS. When I use the AFPRSC keyword to print it from the
IFS, it just prints a blank page. I really need to have it print from a
printer file so we can combine it (it is a Fedex label) with a packing
slip. It prints on a special form that has a peel-off label on the top and
the packing slip on the bottom of the same page.

I can copy the PDF from the IFS to my desktop and print it manually
from there and it looks perfect. Am I missing something on my AS400 that
will allow the printer to print the PDF with the AFPRSC keyword? We aren't
currently printing anything else (except UPS label which are .GIF) this way.

Have you been able to print PDFs from a printer file?

Thanks,
Marianne




www.pilotpen.us
Marianne Hatcher - Senior Systems Analyst
Office: (904) 645-9999 ext.1262
Pilot Corporation of America
3855 Regent Blvd, Jacksonville, Florida 32224 United States

This email and any files transmitted with it are confidential and
intended solely for the use of the individual or entity to whom they are
addressed. If you have received this email in error please notify the
system manager. This message contains confidential information and is
intended only for the individual named. If you are not the named addressee
you should not disseminate, distribute or copy this e-mail. Please notify
the sender immediately by e-mail if you have received this e-mail by
mistake and delete this e-mail from your system. If you are not the
intended recipient you are notified that disclosing, copying, distributing
or taking any action in reliance on the contents of this information is
strictly prohibited.
-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf
Of Vernon Hamberg
Sent: Thursday, August 11, 2016 12:58 PM
To: Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>
Subject: Re: GIF or JPEG printing still struggling

Hi Marianne

What version of the OS are you on? It seems it must be 7.2 or above,
since your normal printing is working - HPT is taking care of you.

We've been able to get the PDF itself into a *USERASCII file using the
QImgCvtImg API - that puts raw PDF into the spooled file - works only if
your printer has a direct PDF printing module.

Are you creating the PDFs yourself or getting them from somewhere else?

I can get GIFs into a PDF using AFPSRC at 7.1 - the CPYSPLF to *STMF
and
WSCST(*PDF) does that fine, I just can't get it into true PCL.

There are a couple IBM i KB articles - there titles both begin with
"IBM Printing PDF Stream Files to an..." - one for printers that DO support
direct PDF printing, the other for printers that do NOT.

But they suggest using FTP to send the stream file to a printer file
you create, and that just doesn't fly too well for me - have to sign in and
all.

HTH
Vern

On 8/11/2016 11:18 AM, Hatcher, Marianne wrote:

I got GIFs to print using

R GIFLABEL AFPRSC(&GIFLBLID 22 0.08 2.20 +
(*ROTATION 0) (*PATH &GIFPATH) +
(*SIZE 7 4) (*MAPOPT *ST))

I pass my label name to GIFLBIID and the path to GIFPATH within my
RPG program and it works great (this is used to print UPS labels
that are sent back from their API)


Now I need to print PDFs the same way but only get a blank page. I
have tried component id's 25 and 49. Has anyone been able to print PDFs
this way? I need this for printing FedEx labels.





www.pilotpen.us
Marianne Hatcher - Senior Systems Analyst
Office: (904) 645-9999 ext.1262
Pilot Corporation of America
3855 Regent Blvd, Jacksonville, Florida 32224 United States


This email and any files transmitted with it are confidential and
intended solely for the use of the individual or entity to whom they are
addressed. If you have received this email in error please notify the
system manager. This message contains confidential information and is
intended only for the individual named. If you are not the named addressee
you should not disseminate, distribute or copy this e-mail. Please notify
the sender immediately by e-mail if you have received this e-mail by
mistake and delete this e-mail from your system. If you are not the
intended recipient you are notified that disclosing, copying, distributing
or taking any action in reliance on the contents of this information is
strictly prohibited.
-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf
Of Michael Schutte
Sent: Thursday, August 11, 2016 11:59 AM
To: Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>
Subject: Re: GIF or JPEG printing still struggling

Yes that's the same issue I was having. I got around that by
converting PDF and then converting the PDF back to a userascii spool file.
I know you mentioned in another thread that it doesn't work likely because
it's a dell printer emulating Hp. So you really need to convert to pcl.
There's a thread on experts exchange if you want to read up. Go to google
and search for aix PDF to pcl.

Sent from my iPhone

On Aug 11, 2016, at 11:50 AM, Jack Tucky <jacktucky@xxxxxxxxx> wrote:

If I use Spoolmail to send a PDF to my email, it looks fine. If I
print, I get a blank page.

Interested in ANY more ideas. I created a simple GIF with the
letter A on it.

We don't have any HP printers but the DELL printer I'm testing with
emulates HP

Here is my printer description:

CRTDEVPRT DEVD(AJLASER) DEVCLS(*LAN) TYPE(3812) MODEL(1) +
LANATTACH(*IP) PORT(9100) ATTACH(*DIRECT) ONLINE(*YES) +
FONT(11 *NONE) FORMFEED(*AUTOCUT) SEPDRAWER(*FILE) +
PRTERRMSG(*INQ) MSGQ(*CTLD) ACTTMR(170) INACTTMR(*SEC15) +
LINESPEED(19200) WORDLEN(8) PARITY(*NONE) STOPBITS(1) +
TRANSFORM(*YES) MFRTYPMDL(*HP5) PPRSRC1(*LETTER) +
PPRSRC2(*LETTER) ENVELOPE(*NUMBER10) ASCII899(*NO) +
IMGCFG(*IMGD02) CHRID(*SYSVAL) RMTLOCNAME('192.168.2.101') +
USRDFNOPT(*IBMSHRCNN) SYSDRVPGM(*HPPJLDRV) +
TEXT('Dell 2135CN') +
PUBLISHINF(*UNKNOWN *UNKNOWN *UNKNOWN *UNKNOWN *BLANK +
(*UNKNOWN))

My Printer file created with DEVTYPE(*AFPDS) R IMAGE
AFPRSC('A.GIF' 22 +
1.000 1.000 (*SIZE 4.00 6.000) +
(*PATH '/tmp') +
(*MAPOPT *SL))

Program is really nothing
FPRTIMAGE9pO E PRINTER
/free
write image
*inlr = *On;
return;
/end-free
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L)
mailing list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To
subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please
take a moment to review the archives at
http://archive.midrange.com/midrange-l.

Please contact support@xxxxxxxxxxxx for any subscription related
questions.

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L)
mailing list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To
subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please
take a moment to review the archives at
http://archive.midrange.com/midrange-l.

Please contact support@xxxxxxxxxxxx for any subscription related
questions.

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L)
mailing list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To
subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take
a moment to review the archives at http://archive.midrange.com/mi
drange-l.

Please contact support@xxxxxxxxxxxx for any subscription related
questions.
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L)
mailing list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To
subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take
a moment to review the archives at
http://archive.midrange.com/midrange-l.

Please contact support@xxxxxxxxxxxx for any subscription related
questions.

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe,
unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take
a moment to review the archives at http://archive.midrange.com/mi
drange-l.

Please contact support@xxxxxxxxxxxx for any subscription related
questions.
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe,
unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take
a moment to review the archives at
http://archive.midrange.com/midrange-l.

Please contact support@xxxxxxxxxxxx for any subscription related
questions.

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe,
unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a
moment to review the archives at http://archive.midrange.com/midrange-l.

Please contact support@xxxxxxxxxxxx for any subscription related
questions.
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.

Please contact support@xxxxxxxxxxxx for any subscription related
questions.

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.

Please contact support@xxxxxxxxxxxx for any subscription related
questions.