SRCA7004761

DSPMSG QSYSOPR has CPPEA58
Message . . . . : *Attention* Contact your hardware service provider
now.
Cause . . . . . : A platform Licensed Internal Code error occurred.
Recovery . . . : Contact your hardware service provider and provide the

following list of possible failing items:
FMWREXP

FMWREXP = Firmware Expired. Apparently there's this "Update Access Key"
which needs to be updated on an ungodly short basis.
https://www.ibm.com/support/knowledgecenter/POWER8/p8eai/A7004761.htm

On your HMC (you'll have to be either local or use remote access from your
KVM because https://yourHMC will NOT show these windows) you will see pop
up windows with
HSCL00871
CoD Message: yourRackName
The update access key for this server expires in x days. To obtain a new
update access key for this server, contact the serer manufacturer* (for
IBM servers, you may obtain a new update access key from the website at
http://www.ibm.com/servers/eserver/ess). Use the management console
Capacity on Demand (CoD) Enter CoD Code task to enter the new key on the
server.
*For non-IBM branded servers contact your service support provider.

You will have to go to ESS and order new CoD codes for all racks supported
by this server.
https://www-304.ibm.com/servers/eserver/ess/ProtectedServlet.wss
My Entitled Hardware
UAK - View, Download and Request Keys
Of course, all mine expired today. So I looked at the directions which
say something to the effect if you think this is wrong then select one
system at a time and click send help and IBM will contact you.

To enter in the CoD codes you will need to use the Classic interface
unless someone else can find it in the Enhanced Version. I cannot.


Rob Berendt