Re: Modifying SMTPR4 for AUTH LOGIN -- MIDRANGE-L

What's interesting is there is no AUTH available in the list it gives after
the first EHLO.

250-SIZE 52428800
250-8BITMIME
250-DSN
250-PIPELINING
250-PIPECONNECT
250-AUTH CRAM-MD5 PLAIN LOGIN
250-CHUNKING
250-STARTTLS
250-PRDR
250 HELP

But it still takes the user and password... that's a little weird.

What I do see is that you probably need, is STARTTLS... then once the TLS
negotiation (which means changing the socket to an SSL socket) is done the
AUTH should work and after that MAIL TO: etc... But I don't recall what
port you're connecting to or if SSL/TLS is required.

so, it should be:

EHLO <--first one After this it gives you a list of available commands
STARTLS
EHLO <--- after the socket is switched to SSL and you have another set of
commands, AUTH being one of them.
AUTH LOGIN
MAIL FROM:
etc...

On Thu, Dec 8, 2022 at 3:07 PM Don Brown via MIDRANGE-L <
midrange-l@xxxxxxxxxxxxxxxxxx> wrote:

Thanks Brad,

I removed the RSET but still can not seem to do anything after the
authentication is successful

But I can use telnet and type this all in line by line and it works.

Here is the log after removing the RSET

What am I missing ?

Connection to mail.smtp2go.com established
220 mail.smtp2go.com ESMTP Exim 4.96-S2G Thu, 08 Dec 2022 21:01:41 +0000
EHLO MSD820.MSD.LOCAL
250-mail.smtp2go.com Hello MSD820.MSD.LOCAL
250-SIZE 52428800
250-8BITMIME
250-DSN
250-PIPELINING
250-PIPECONNECT
250-AUTH CRAM-MD5 PLAIN LOGIN
250-CHUNKING
250-STARTTLS
250-PRDR
250 HELP
AUTH LOGIN
334 VXNlcm5hbWU6
<user_name>
334 UGFzc3dvcmQ6
<password>
235 Authentication succeeded
MAIL FROM:<don@xxxxxxxxxx>
500 unrecognized command
ERROR: Invalid reply code to MAIL command.
RCPT TO:<don@xxxxxxxxxx>
503 sender not yet given
ERROR: Invalid reply code to RCPT command.
DATA
503-All RCPT commands were rejected with this error:
503-503 sender not yet given
503 valid RCPT command must precede DATA
ERROR: Invalid reply code to RCPT command.
QUIT
221 mail.smtp2go.com closing connection

Don

From: "Brad Stone" <bvstone@xxxxxxxxx>
To: "Midrange Systems Technical Discussion"
<midrange-l@xxxxxxxxxxxxxxxxxx>
Date: 08/12/2022 11:50 PM
Subject: Re: Modifying SMTPR4 for AUTH LOGIN
Sent by: "MIDRANGE-L" <midrange-l-bounces@xxxxxxxxxxxxxxxxxx>

You shoudn't need the RSET command.

On Thu, Dec 8, 2022 at 3:40 AM Don Brown via MIDRANGE-L <
midrange-l@xxxxxxxxxxxxxxxxxx> wrote:

Hi All,

I know there are great tools available but for the time being our
requirement is to add authentication to our out going emails.

We have been using Scott's SMTPR4 for a long time and it has bee very
good.

I have modified the SMTP_hshake procedure to include an authentication
request.

The results I am getting looked promising but I am stuck after the 235
Authentication succeeded.

Any suggestions gratefully appreciated

Here is my joblog with debug enabled in the program

Connection to mail.smtp2go.com established
220 mail.smtp2go.com ESMTP Exim 4.96-S2G Thu, 08 Dec 2022 09:11:06 +0000
EHLO MSD820.XXX.LOCAL
250-mail.smtp2go.com Hello MSD820.XXX.LOCAL [11.222.111.55]
250-SIZE 52428800
250-8BITMIME
250-DSN
250-PIPELINING
250-PIPECONNECT
250-AUTH CRAM-MD5 PLAIN LOGIN
250-CHUNKING
250-STARTTLS
250-PRDR
250 HELP
AUTH LOGIN
334 VXNlcm5hbWU6
<user_name>
334 UGFzc3dvcmQ6
<password>
235 Authentication succeeded
RSET
500 unrecognized command
ERROR: Invalid reply code to RSET command.
MAIL FROM:<don.brown@xxxxxxxxxx>
ERROR: send(): Descriptor not valid.
SMTP set sender email address fail
Descriptor not valid.

I added the RSET based on an example I saw - really do not know if I

need

it but I get a similar error if I omit it.

If I look at the connection log from a SMTP Diag tool it looks very
similar well the same to me.

Connecting to mail server.
Connected.
220 mail.smtp2go.com ESMTP Exim 4.96-S2G Wed, 07 Dec 2022 00:31:47 +0000
EHLO DON-1712
250-mail.smtp2go.com Hello DON-1712 [14.202.71.142]
250-SIZE 52428800
250-8BITMIME
250-DSN
250-PIPELINING
250-PIPECONNECT
250-AUTH CRAM-MD5 PLAIN LOGIN
250-CHUNKING
250-STARTTLS
250-PRDR
250 HELP
AUTH LOGIN
334 VXNlcm5hbWU6
<user_name>
334 UGFzc3dvcmQ6
<password>
235 Authentication succeeded
RSET
250 Reset OK
MAIL FROM: <don@xxxxxxxxxx>
250 OK
RCPT TO: <don@xxxxxxxxxx>
250 Accepted <don@xxxxxxxxxx>
DATA
354 Enter message, ending with "." on a line by itself
.
250 OK id=1p2iLm-bMGltl-06
Forcing disconnection from SMTP server.
QUIT
221 mail.smtp2go.com closing connection
Disconnected.

Message Sent Successfully

Here is the modified procedure ...

// -----------------------------------------
// Send HELO command
// -----------------------------------------

msg = 'EHLO ' + host + CRLF;
if ( sendtext(p_SMTP: msg) = *OFF );
return *OFF;
endif;

rc = response(p_SMTP);
if (rc = -1);
return *OFF;
endif;

if (rc <> 250);
SetError(SMTP_ERR_INVREPLY
: 'Invalid reply code to HELO command.');
return *OFF;
endif;

// -----------------------------------------
// Send AUTH LOGIN Command
// -----------------------------------------

msg = 'AUTH LOGIN ' + CRLF;
if ( sendtext(p_SMTP: msg) = *OFF );
return *OFF;
endif;

rc = response(p_SMTP);
if (rc = -1);
return *OFF;
endif;

if (rc <> 334);
SetError(SMTP_ERR_INVREPLY
: 'Invalid reply code to AUTH LOGIN command.');
return *OFF;
endif;

// -----------------------------------------
// Send USER Name base 64 encoded
// -----------------------------------------

msg = 'user@xxxxxxxxxx';
len = e2a( SMTP: msg : buf : %size(buf));
encLen = base64_encode( %addr (buf) : len : %addr(encData ) :
%size(encData ) -2);
%subst( encData: encLen+1 ) = CRLF;
if ( sendtext(p_SMTP: encData) = *OFF );
return *OFF;
endif;

rc = response(p_SMTP);
if (rc = -1);
return *OFF;
endif;

if (rc <> 334);
SetError(SMTP_ERR_INVREPLY
: 'Invalid reply code to USER name.');
return *OFF;
endif;

// -----------------------------------------
// Send Password base 64 encoded
// -----------------------------------------

msg = 'password';
len = e2a( SMTP: msg : buf : %size(buf));
encLen = base64_encode( %addr (buf) : len : %addr(encData ) :
%size(encData ) -2);
%subst( encData: encLen+1 ) = CRLF;
if ( sendtext(p_SMTP: encData) = *OFF );
return *OFF;
endif;

rc = response(p_SMTP);
if (rc = -1);
return *OFF;
endif;

if (rc <> 235);
SetError(SMTP_ERR_INVREPLY
: 'Authentication failed.');
return *OFF;
endif;

// -----------------------------------------
// Send RSET Command
// -----------------------------------------

msg = 'RSET ' + CRLF;
if ( sendtext(p_SMTP: msg) = *OFF );
return *OFF;
endif;

rc = response(p_SMTP);
if (rc = -1);
return *OFF;
endif;

if (rc <> 250);
SetError(SMTP_ERR_INVREPLY
: 'Invalid reply code to RSET command.');
return *OFF;
endif;

Thanks

Don

--
This email has been scanned for computer viruses. Although MSD has taken
reasonable precautions to ensure no viruses are present in this email,

MSD

cannot accept responsibility for any loss or damage arising from the use

of

this email or attachments..
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing

list

To post a message email: MIDRANGE-L@xxxxxxxxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: https://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxxxxxxxx
Before posting, please take a moment to review the archives
at https://archive.midrange.com/midrange-l.

Please contact support@xxxxxxxxxxxxxxxxxxxx for any subscription related
questions.

Help support midrange.com by shopping at amazon.com with our affiliate
link: https://amazon.midrange.com

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list
To post a message email: MIDRANGE-L@xxxxxxxxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: https://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxxxxxxxx
Before posting, please take a moment to review the archives
at https://archive.midrange.com/midrange-l.

Please contact support@xxxxxxxxxxxxxxxxxxxx for any subscription related
questions.

Help support midrange.com by shopping at amazon.com with our affiliate
link: https://amazon.midrange.com

--
This email has been scanned for computer viruses. Although MSD has taken
reasonable precautions to ensure no viruses are present in this email, MSD
cannot accept responsibility for any loss or damage arising from the use of
this email or attachments..
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: https://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxxxxxxxx
Before posting, please take a moment to review the archives
at https://archive.midrange.com/midrange-l.

Please contact support@xxxxxxxxxxxxxxxxxxxx for any subscription related
questions.

Help support midrange.com by shopping at amazon.com with our affiliate
link: https://amazon.midrange.com