Re: Home office design -- PCTECH

Depends on your municipality but in some places, yes, running _any_
cable through a vent is a violation.  Crossing through or streaming
along; either way can be illegal.  I didn't know it until recently when
the electrician I use mentioned it when discussing some of the work he's
come across in other homes. 

However, spaces around vents are apparently OK, at least where I live.
In my home there's a vent space for the furnace & hot water heater.  The
flue is only about a 4 or 5 inch diameter and the space is far bigger
than that.  Local code says it's OK to run low voltage cable in that
vent space.  I plan on doing that when we run CAT6 from the basement to
the 2nd floor.  We'll just take pains to keep it to the side so it
doesn't touch/vibrate against the flue.

John A. Jones, CISSP
Americas Information Security Officer
Jones Lang LaSalle, Inc.
V: +1-630-455-2787 F: +1-312-601-1782
john.jones@xxxxxxxxxx

-----Original Message-----
From: pctech-bounces@xxxxxxxxxxxx [mailto:pctech-bounces@xxxxxxxxxxxx]
On Behalf Of Dan
Sent: Thursday, October 12, 2006 2:24 PM
To: PC Technical Discussion for iSeries Users
Subject: Re: [PCTECH] Home office design

On 10/12/06, Shannon O'Donnell <shannon.odonnell@xxxxxxxxxxxxxx> wrote:


An alternative to running the wire inside the walls is to run it on 
the outside of the wall and use a plastic wire cover to hide it.  
Doesn't looka as nice but if you can't get into the walls, a problem I

had in my cabin where the walls were 6-inch logs, then it's better

than nothing.


Another alternative that worked for us was to use the return air vent.
Our router is in the basement, and my son has a PC on the second floor.
Instead of running the cable through the vent "grid" in his room, I
rerouted it in his room so the cable comes out of a wall plate.

Dunno if I broke any building codes doing this.

- Dan
--
This is the PC Technical Discussion for iSeries Users (PcTech) mailing
list To post a message email: PcTech@xxxxxxxxxxxx To subscribe,
unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/pctech
or email: PcTech-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives at
http://archive.midrange.com/pctech.


This email is for the use of the intended recipient(s) only.  If you have 
received this email in error, please notify the sender immediately and then 
delete it.  If you are not the intended recipient, you must not keep, use, 
disclose, copy or distribute this email without the author's prior permission.  
We have taken precautions to minimize the risk of transmitting software 
viruses, but we advise you to carry out your own virus checks on any attachment 
to this message.  We cannot accept liability for any loss or damage caused by 
software viruses.  The information contained in this communication may be 
confidential and may be subject to the attorney-client privilege. If you are 
the intended recipient and you do not wish to receive similar electronic 
messages from us in the future then please respond to the sender to this effect.