Knoppix Network Adapter question

["Chuck Lewis" <chuck.lewis@xxxxxxxxxxxxx>]

Hi Folks,

 

Working with Knoppix to try and salvage stuff.

 

It did not pick up the integrated Network Adapter so I stuck a 3Comm into an
open slot.

 

It see that one when I go to set it up.

 

I get:

 

Use DHCP broadcast ? and if I click on Yes it tries for awhile and comes
back with "Failed"

 

So I start over and select No and I get:

 

Please enter IP Address for eth0

And I enter 172.16.10.78 and click on OK

 

Please enter Network Mask for eth0

And I enter 255.255.255.0 and click on OK.

 

Please enter Broadcast Address for eth0

And I have no idea what to enter here because we do not use that in a
Windows config.

 

Please enter Default Gateway

And I enter 172.16.10.3 and click on OK

 

Please enter Nameservers 

And I enter 64.132.94.250 216.136.95.2 and click on OK

 

And it says all is well but I cannot hit any website from it and I cannot
ping it from another PC.

 

And ideas as to what I am doing wrong ?

 

Thanks !

 

Chuck