RE: multi language interfaces -- RPG400-L

I also think of going with MSGID. If I understand right MSGID will not
show your field content in SDA but MSGCON does? 

> -----Oorspronkelijk bericht-----
> Van: rpg400-l-bounces@xxxxxxxxxxxx 
> [mailto:rpg400-l-bounces@xxxxxxxxxxxx] Namens rob@xxxxxxxxx
> Verzonden: maandag 6 juni 2005 22:50
> Aan: RPG programming on the AS400 / iSeries
> Onderwerp: RE: multi language interfaces
> 
> MSGCON is at compile time.
> MSGID is at run time.  I'd go with MSGID.
> 
> Frankly, I'd like to know why MSGID is a pain in the neck.
> 
> Rob Berendt
> --
> Group Dekko Services, LLC
> Dept 01.073
> PO Box 2000
> Dock 108
> 6928N 400E
> Kendallville, IN 46755
> http://www.dekko.com
> 
> 
> 
> 
> 
> "Simonse, Arco \(CMK\)" <ArcoSimonse@xxxxxxxxxxxxxxxxx> 
> Sent by: rpg400-l-bounces@xxxxxxxxxxxx
> 06/06/2005 03:39 PM
> Please respond to
> RPG programming on the AS400 / iSeries <rpg400-l@xxxxxxxxxxxx>
> 
> 
> To
> "RPG programming on the AS400 / iSeries" <rpg400-l@xxxxxxxxxxxx>
> cc
> 
> Subject
> RE: multi language interfaces
> 
> 
> 
> 
> 
> 
> Hello Rob,
> 
> I'm new to the usage of message files, but I just found in the manual
> that when I use the MSGCON keyword it will be neccessary to recompile
> the dspf if the msgf changes. 
> I begin to understand what Dennis said: The alternative is to 
> use msgid,
> but that will give a pain in SDA.
> Maybe Code Designer will handle this better? I'll try it.
>  
> Best regards, Arco.
> 
> > -----Oorspronkelijk bericht-----
> > Van: rpg400-l-bounces@xxxxxxxxxxxx 
> > [mailto:rpg400-l-bounces@xxxxxxxxxxxx] Namens rob@xxxxxxxxx
> > Verzonden: maandag 6 juni 2005 22:18
> > Aan: RPG programming on the AS400 / iSeries
> > Onderwerp: RE: multi language interfaces
> > 
> > No, you do not have to compile every dspf against it's language.
> > 
> > What he said was, suppose the msgf is named A0001G.  Let's 
> > say your application was called MYGL.  Then you would have 
> > additional libraries: 
> > MYGLEN for English, MYGLFR for French, etc.  Or you could 
> adopt IBM's
> > MYGL2924 for English, etc...
> > Then, depending on the individuals language preference you 
> > would put the
> > MYGL2924 library higher in their library list.  Once again, 
> > the name of the msgf does not change - the library does.
> > 
> > Rob Berendt
> > --
> > Group Dekko Services, LLC
> > Dept 01.073
> > PO Box 2000
> > Dock 108
> > 6928N 400E
> > Kendallville, IN 46755
> > http://www.dekko.com
> > 
> > 
> > 
> > 
> > 
> > "Simonse, Arco \(CMK\)" <ArcoSimonse@xxxxxxxxxxxxxxxxx> 
> > Sent by: rpg400-l-bounces@xxxxxxxxxxxx
> > 06/06/2005 03:02 PM
> > Please respond to
> > RPG programming on the AS400 / iSeries <rpg400-l@xxxxxxxxxxxx>
> > 
> > 
> > To
> > "RPG programming on the AS400 / iSeries" <rpg400-l@xxxxxxxxxxxx>
> > cc
> > 
> > Subject
> > RE: multi language interfaces
> > 
> > 
> > 
> > 
> > 
> > 
> > Dennis,
> > 
> > Thanks for the detailed explanation. It looks pretty good. 
> We haven't
> > done much with message files until now, so next  question 
> > comes up: If I
> > understand you right you have to compile every dspf against its
> > language-specific messagefile. Is there no way to avoid 
> this? I try to
> > find a way to minimize the amount of neccesary objects.
> > And do you define general constants like "F3=Exit" also in every
> > messagefile?
> > 
> > TIA, Arco. 
> > 
> > > -----Oorspronkelijk bericht-----
> > > Van: rpg400-l-bounces@xxxxxxxxxxxx 
> > > [mailto:rpg400-l-bounces@xxxxxxxxxxxx] Namens Denis Robitaille
> > > Verzonden: maandag 6 juni 2005 15:48
> > > Aan: rpg400-l@xxxxxxxxxxxx
> > > Onderwerp: Re: multi language interfaces
> > > 
> > > In my company, we do support multi language (french, english, 
> > > german and sweedish). We have been doing this for more than 
> > > 10 years. Here is how we do it:
> > > 
> > > - there is no language specific item in any RPG/CL/CMD/MNU 
> > > program. Every language specific element comes from MSGF
> > > - We use one library per language and only the primary 
> > > language library (french in our case) has PGM sourcre and object
> > > Ex:  CGLF, CGLD (CGL in French, CGL in Deutch )
> > > - The secondary language libraries only contains MSGF and 
> > > language specific object (no source) like Menu, display files ...
> > > - The JOBD of the user puts the correct library in the 
> > > correct sequence
> > > - We use message constant in display and printer file. This 
> > > imply one source but several objects. I would have preffered 
> > > one object, but if you use SDA to design your screen, message 
> > > ID are a pain because you have no way of seeing how things look.
> > > - We use one message file per language/display files (PGM 
> > > xxxxxR DSPG xxxxxD MSGF xxxxxG)
> > > - This method has the advantage of requiering no change in 
> > > the RPG programs.
> > > - We use a user startup program to change the system library 
> > > list to put the correct QSYS9999 in front of QSYS so the user 
> > > sees IBM stuff in the correct language (WRKSPLF ...)
> > > - since we use MSGF extensively, we develop a replacement 
> > > program for WRKMSGF. Ours allows us to copy a message from 
> > > another, to filter a message file with certains keyword ... 
> > > All stuff that IBM should have added a lon time ago.
> > > - The ony missing thig we have is the initial singnon screen 
> > > and any IBM message that can pop upo before the user start up 
> > > program is ran.
> > > 
> > > Overall this method has proven to be the best balance between 
> > > flexibility and work required.
> > > 
> > > Hope this helps
> > > 
> > > Denis Robitaille
> > > Directeur services technique TI
> > > 819 363 6130
> > > 
> > > SUPPORT
> > > Jour (EST) Daytime : 819-363-6134
> > > En-dehors des heures (EST) After hour : 819-363-6158 Network 
> > > Status : 819-363-6157
> > > 
> > > >>> ArcoSimonse@xxxxxxxxxxxxxxxxx 2005-06-06 05:37:23 >>>
> > > Hi all,
> > > 
> > > In our shop 95 % of the applications is RPG with 5250 user 
> > interfaces.
> > > Almost all of the display files are hardcoded with Dutch 
> > > conversations.
> > > Management has decided that all new applications should have 
> > > multilangual user interfaces, based on user preferences.
> > > The system language (we are on V5R2) is English and that will 
> > > stay as it is. Only the applications become multilang interfaces.
> > > 
> > > I googled around but can't find much about how to implement 
> > > such thing.
> > > Does anybody have a good starting point for this?
> > > 
> > > Many thanks,
> > > 
> > > Arco Simonse
> > > pgmr
> > > 
> DISCLAIMER:
> This message contains information that may be privileged or
> confidential and is the property of C.Meijer B.V. It is 
> intended only for 
> the person to whom it is addressed. If you are not the 
> intended recipient, 
> you are not authorized to read, print, retain, copy,disseminate, 
> distribute, or use this message or any part thereof. If you
> receive this message in error, please notify the sender 
> immediately and 
> delete all copies of this message. 
> 
> This footnote also confirms that this email message has been 
> swept by the 
> presence of computer viruses
> 
> 
> -- 
> This is the RPG programming on the AS400 / iSeries (RPG400-L) 
> mailing list
> To post a message email: RPG400-L@xxxxxxxxxxxx
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/mailman/listinfo/rpg400-l
> or email: RPG400-L-request@xxxxxxxxxxxx
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/rpg400-l.
> 
> 
> -- 
> This is the RPG programming on the AS400 / iSeries (RPG400-L) 
> mailing list
> To post a message email: RPG400-L@xxxxxxxxxxxx
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/mailman/listinfo/rpg400-l
> or email: RPG400-L-request@xxxxxxxxxxxx
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/rpg400-l.
> 
> 
DISCLAIMER:
This message contains information that may be privileged or
confidential and is the property of C.Meijer B.V. It is intended only for the 
person to whom it is addressed. If you are not the intended recipient, you are 
not authorized to read, print, retain, copy,disseminate, distribute, or use 
this message or any part thereof. If you
receive this message in error, please notify the sender immediately and delete 
all copies of this message. 

This footnote also confirms that this email message has been swept by the 
presence of computer viruses