RE: Sfldsp problem

["Marvin Radding" <marvin.radding@xxxxxxxxxxxxxxxxxxxxx>]

Here is what is happening.  When you suppress the writing of the subfile, it 
doesn't write to the screen. Which means that it leaves whatever is there. What 
you need to do is use the option to clear records from the display.

You can find it in the Select Overlay Keywords Screen at the bottom. You can 
put an indicator on it and put your subfile control record name in the space 
provided. At least that my theory.  I haven't had a chance to test it. But that 
is your problem; I have encountered the same thing.  Hope this helps.

Marvin

PS Here is what it looks like (the keyword is ERASE):
                            Select Overlay Keywords                             
                                                                                
 Record . . . :   REC10C                                                        
                                                                                
 Type choices, press Enter.                                                     
                                          Keyword    Y=Yes  Indicators/+   Roll 
   Overlay without erasing  . . . . . .   OVERLAY                               
   Retain data on re-display  . . . . .   PUTRETAIN                             
   Protect all input fields . . . . . .   PROTECT                               
   Activate OVRDTA and OVRATR . . . . .   PUTOVR                                
   Override Data  . . . . . . . . . . .   OVRDTA                                
   Override Attribute . . . . . . . . .   OVRATR                                
   Initialize input fields  . . . . . .   INZINP                                
   Reset all modified data tags . . . .   MDTOFF                                
     MDTOFF parameter . . . . . . . . .     *UNPR                               
                                            *ALL                                
   Erase all input fields . . . . . . .   ERASEINP                              
     ERASEINP parameter . . . . . . . .     *MDTON                              
                                            *ALL                                
   Erase all records below  . . . . . .   ERASE                                 
                                                                                
                                                                                
 F3=Exit   F12=Cancel                                                           
                                                                                

-----Original Message-----
From: rpg400-l-bounces@xxxxxxxxxxxx
[mailto:rpg400-l-bounces@xxxxxxxxxxxx]On Behalf Of
rpg400-l-request@xxxxxxxxxxxx
Sent: Thursday, November 02, 2006 7:42 AM
To: rpg400-l@xxxxxxxxxxxx
Subject: RPG400-L Digest, Vol 5, Issue 1223

message: 2
date: Thu, 2 Nov 2006 10:34:35 -0500
from: "Phil Kestenbaum" <pkestenbaum@xxxxxxxxxxx>
subject: RE: Sfldsp problem

Can you post the code?

-----Original Message-----
From: rpg400-l-bounces@xxxxxxxxxxxx
[mailto:rpg400-l-bounces@xxxxxxxxxxxx] On Behalf Of Smith, Mike
Sent: Thursday, November 02, 2006 10:35 AM
To: rpg400-l@xxxxxxxxxxxx
Subject: Sfldsp problem

I have written a Data entry subfile.  First Dataentry subfile I have
written in years and years.  

On the SFLCTl is 1 field to enter a route.  
Upon entering the route and validating a subfile is displayed with any
existing records and empty subfile lines 

When F12 is entered the subfile display is turned off and only the
Subfile Control should be displayed.  This is where my problem is.  The
Subfile Display continues to show.  I have verified that the SFLDSP is
*off .  I am using the same indicator to control the headings on the
SFLCTL.  These  dissappear when F12 is selected, but the subfile does
not.  

Anybody encountered this before?

Michael Smith
iSeries.mySeries.