RE: RPGLE - parsing XML files. -- RPG400-L

Will do....thank you.

James Whitham
Retail Express Programmer and Support

KURT GEIGER LIMITED
75 Bermondsey Street, London, SE1 3XF
t: +44 (0)207 546 1888 dl: +44
f: +44 (0)207 546 1880 m: +44 (0)20 7546 1888
WWW.KURTGEIGER.COM

-----Original Message-----
From: rpg400-l-bounces@xxxxxxxxxxxx
[mailto:rpg400-l-bounces@xxxxxxxxxxxx] On Behalf Of Jim Franz
Sent: 02 August 2008 14:38
To: RPG programming on the AS400 / iSeries
Subject: Re: RPGLE - parsing XML files.

google "c2m1601" and there were several entries.
There is a ptf fix in this apar -SE20876, for the same qc2util1.
Check it out.
Jim

----- Original Message -----
From: "James Whitham" <james.whitham@xxxxxxxxxxxxxx>
To: "RPG programming on the AS400 / iSeries" <rpg400-l@xxxxxxxxxxxx>
Sent: Saturday, August 02, 2008 6:37 AM
Subject: RE: RPGLE - parsing XML files.

The full joblog is in the attached text file...

James Whitham
Retail Express Programmer and Support

KURT GEIGER LIMITED
75 Bermondsey Street, London, SE1 3XF
t: +44 (0)207 546 1888 dl: +44
f: +44 (0)207 546 1880 m: +44 (0)20 7546 1888
WWW.KURTGEIGER.COM

-----Original Message-----
From: rpg400-l-bounces@xxxxxxxxxxxx
[mailto:rpg400-l-bounces@xxxxxxxxxxxx] On Behalf Of Jim Franz
Sent: 02 August 2008 01:01
To: RPG programming on the AS400 / iSeries
Subject: Re: RPGLE - parsing XML files.

James,
What messages in job log just before this?
Jim
----- Original Message -----
From: "James Whitham" <james.whitham@xxxxxxxxxxxxxx>
To: <rpg400-l@xxxxxxxxxxxx>
Sent: Friday, August 01, 2008 4:26 PM
Subject: RPGLE - parsing XML files.

I currently have an issue with a program that parses an XML file loaded
into the IFS.

Its been working for several month, but now as decided to pack up,

with

no system changes being made.

Its a DOMparse_init instruction that Fails....but I'm at a loss

why....

Here are some of the joblog details.....

Message . . . . : Member XMLFMT
file XMLFMT in R5231CADTA cleared.
M1601 Escape 30 01/08/08 16:08:22.669704
QC2UTIL1 QSYS *STMT QYPPRT370 QSYS *STMT
From module . . . . . . . . :
QC2SIGNL
From procedure . . . . . . :
raise
Statement . . . . . . . . . : 6

To module . . . . . . . . . :
EXCEPTIO37
To procedure . . . . . . . :
myabort__3stdFv
Statement . . . . . . . . . : 1
*PRCLT
Message . . . . : Signal SIGABRT
raised (abnormal termination).
Cause . . . . . : The signal
SIGABRT was raised to indicate an abnormal
termination.

If anyone as any ideas on what is wrong and how to resolve the issue

the

will be very much appreciated.

James Whitham
Retail Express Programmer and Support

KURT GEIGER LIMITED
75 Bermondsey Street, London, SE1 3XF
t: +44 (0)207 546 1888 dl: +44 (0)78 6790 1772
f: +44 (0)207 546 1880 m: +44 (0)20 7546 1888
WWW.KURTGEIGER.COM <http://www.kurtgeiger.com/>

***********************************************************************

This message has been sent via the Internet. Internet communications
are not secure against interception or modification. Kurt Geiger
Limited therefore cannot guarantee that this message has not been
modified in transit.
This message and any files transmitted with it are confidential and
intended solely for the use of the addressee. If you have received

this

message in error please notify the sender and destroy your copies of
the message and any attached files.

Kurt Geiger Limited
Registered in England
Company Number 968046
Registered Office:
75 Bermondsey Street
Borough
London
SE1 3XF

***********************************************************************

--
This is the RPG programming on the AS400 / iSeries (RPG400-L) mailing

list

To post a message email: RPG400-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/rpg400-l
or email: RPG400-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/rpg400-l.