Re: Shaded box

[pepitovadecurt <pepitovadecurt@xxxxxxxxx>]

Hi, I have a IBM 1332, Infoprint20, Canon IR2570c and Canon IR4570.
These printers support the shade box?
When I use the program "AFP Workbench Viewer", the shade doesn't 
appears, the box and pagseg appears correctly.
When I assign boxcolor grey, in the "AFP Workbench Viewer" appears ok
but when I print it, appears black.


Wayne McAlpine escribió:
> I believe that's hardware dependent.  From the DDS Reference:
>
>     1. When you specify box shading with no color or with the basic 
> color model, IM1 image is used as the fill pattern. This works best on 
> 240/300/600 pel printers. It may produce unsatisfactory results on the 
> 4224, 4234, and 64XX printers.
>     2. When you specify box shading with an extended color model (RGB, 
> CMYK, or CIELAB), IOCA image is used for the fill pattern. IM1 image 
> does not support these color models. The IPDS™ printer must support IOCA 
> image for this to print properly.
>     3. When you specify box shading with an extended color model, the 
> following monochrome IPDS printers support gray scaling when you specify 
> highlight color:
>            * Infoprint® 60
>            * Infoprint 62
>            * Infoprint 2000
>            * Infoprint 3000
>            * Infoprint 4000
>        These printers must be at ucode level 8.3 or later.
>
>
> pepitovadecurt wrote:
> > I have a afp. No problem to draw a box, but is posible to do a box with 
> > shade?