Re: Cannot Start Debugging

["Tarr, Kenneth" <Kenneth.Tarr@xxxxxxxxxxxxxxxxxx>]

Have you started the debug server?  (STRDBGSVR).

-----Original Message-----
From: wdsci-l-bounces@xxxxxxxxxxxx [mailto:wdsci-l-bounces@xxxxxxxxxxxx] On Behalf Of Chamara Withanachchi
Sent: Tuesday, December 22, 2009 3:27 AM
To: wdsci-l@xxxxxxxxxxxx
Subject: [WDSCI-L] Cannot Start Debugging

Hi,

I was trying to debug from my WDSCi but when i Start the debug server
(STRRSESVR NAME(DR)) from my 5250 screen it's giving following message.

Error connecting to Remote Systems Explorer

Message ID . . . . . . :   RSE2001       Severity . . . . . . . :   30

Message type . . . . . :   Information

Date sent  . . . . . . :   22/12/09      Time sent  . . . . . . :   13:24:58



Message . . . . :   Error connecting to Remote Systems Explorer

Cause . . . . . :   The STRRSESVR command could not create a TCP/IP
connection
  to the Remote Systems Explorer (RSE) at remote location 10.10.16.199 on
port
  4300.  Possible causes: The iSeries RSE communications daemon has not been

  started on the client. The remote location name is not a correct TCP/IP

  hostname or address.  The iSeries RSE communications daemon is listening
on
  a different port number. Start the iSeries communication daemon and verify

  that the remote location name and port are valid.




My RSE communication port is set to 4300. and I can do compilations from
WDSCi

Please guide me what I'm missing and what is my mistake.