Re: Error message when compiling SQLRPGLE -- WDSCI-L

A NPE is never a good thing.

I have not seen that one before, probably the best thing is to open a PMR
on it and I or one of the folks on my team will pick it up.

Mike

Mike Hockings, P.Eng.
IBM Rational Developer for System z
IBM Canada Ltd. Laboratory
hockings@xxxxxxxxxx
voice 1-905-413-3199 T/L 313-3199 ITN 23133199
http://www.ibm.com/software/rational/cafe/community/hats

From:
MattLavinder@xxxxxxxxxxxxxxxxxxx
To:
Rational Developer for IBM i / Websphere Development Studio Client for
System i & iSeries <wdsci-l@xxxxxxxxxxxx>
Cc:
Rational Developer for IBM i / Websphere Development Studio Client for
System i & iSeries <wdsci-l@xxxxxxxxxxxx>, wdsci-l-bounces@xxxxxxxxxxxx
Date:
05/14/2010 11:47 AM
Subject:
Re: [WDSCI-L] Error message when compiling SQLRPGLE
Sent by:
wdsci-l-bounces@xxxxxxxxxxxx

Any information on other message I get? When I try to open a source
member
that doesn't exists yet, WSDC would prompt me to create it. In RDP 7.6 I
get the following error:

An unexpected exception has occurred
java.lang.NullPointerException

at
com.ibm.etools.iseries.rse.ui.dialogs.QSYSOpenMemberDialog.processOK
(Unknown Source)

at org.eclipse.rse.ui.dialogs.SystemPromptDialog.buttonPressed
(Unknown Source)

at org.eclipse.jface.dialogs.Dialog$2.widgetSelected(Unknown Source)

at org.eclipse.swt.widgets.TypedListener.handleEvent(Unknown Source)

at org.eclipse.swt.widgets.EventTable.sendEvent(Unknown Source)

at org.eclipse.swt.widgets.Widget.sendEvent(Unknown Source)

at org.eclipse.swt.widgets.Display.runDeferredEvents(Unknown Source)

at org.eclipse.swt.widgets.Display.readAndDispatch(Unknown Source)

at org.eclipse.jface.window.Window.runEventLoop(Unknown Source)

at org.eclipse.jface.window.Window.open(Unknown Source)

at com.ibm.etools.iseries.rse.ui.actions.QSYSOpenMemberAction.run
(Unknown Source)

at
com.ibm.etools.iseries.rse.ui.actions.QSYSOpenMemberActionWindowDelegate.run
(Unknown Source)

at
org.eclipse.ui.internal.handlers.ActionDelegateHandlerProxy.execute(Unknown
Source)

at org.eclipse.core.commands.Command.executeWithChecks(Unknown
Source)

at org.eclipse.core.commands.ParameterizedCommand.executeWithChecks
(Unknown Source)

at org.eclipse.ui.internal.handlers.HandlerService.executeCommand
(Unknown Source)

at org.eclipse.ui.internal.keys.WorkbenchKeyboard.executeCommand
(Unknown Source))

at org.eclipse.ui.internal.keys.WorkbenchKeyboard.press(Unknown
Source)

at org.eclipse.ui.internal.keys.WorkbenchKeyboard.processKeyEvent
(Unknown Source)

at
org.eclipse.ui.internal.keys.WorkbenchKeyboard.filterKeySequenceBindings
(Unknown Source)

at org.eclipse.ui.internal.keys.WorkbenchKeyboard.access$3(Unknown
Source)

at org.eclipse.ui.internal.keys.WorkbenchKeyboard
$KeyDownFilter.handleEvent(Unknown Source)

at org.eclipse.swt.widgets.EventTable.sendEvent(Unknown Source).

at org.eclipse.swt.widgets.Display.filterEvent(Unknown Source)).

at org.eclipse.swt.widgets.Widget.sendEvent(Unknown Source)

at org.eclipse.swt.widgets.Widget.sendEvent(Unknown Source)

at org.eclipse.swt.widgets.Widget.sendEvent(Unknown Source)

at org.eclipse.swt.widgets.Widget.sendKeyEvent(Unknown Source)).

at org.eclipse.swt.widgets.Widget.sendKeyEvent(Unknown Source)).

at org.eclipse.swt.widgets.Widget.wmChar(Unknown Source)

at org.eclipse.swt.widgets.Control.WM_CHAR(Unknown Source)

at org.eclipse.swt.widgets.Control.windowProc(Unknown Source))).

at org.eclipse.swt.widgets.Display.windowProc(Unknown Source))).

at org.eclipse.swt.internal.win32.OS.DispatchMessageW(Native Method)

at org.eclipse.swt.internal.win32.OS.DispatchMessage(Unknown Source)

at org.eclipse.swt.widgets.Display.readAndDispatch(Unknown Source)

at org.eclipse.ui.internal.Workbench.runEventLoop(Unknown Source))

at org.eclipse.ui.internal.Workbench.runUI(Unknown Source)

at org.eclipse.ui.internal.Workbench.access$4(Unknown Source)

at org.eclipse.ui.internal.Workbench$5.run(Unknown Source)

at org.eclipse.core.databinding.observable.Realm.runWithDefault
(Unknown Source)

at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Unknown
Source)

at org.eclipse.ui.PlatformUI.createAndRunWorkbench(Unknown Source)

at org.eclipse.ui.internal.ide.application.IDEApplication.start
(Unknown Source)

at org.eclipse.equinox.internal.app.EclipseAppHandle.run(Unknown
Source)

at
org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication
(Unknown Source))

at
org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start
(Unknown Source)

at org.eclipse.core.runtime.adaptor.EclipseStarter.run(Unknown
Source)

at org.eclipse.core.runtime.adaptor.EclipseStarter.run(Unknown
Source)

at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)

at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)

at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)

at java.lang.reflect.Method.invoke(Unknown Source)

at org.eclipse.equinox.launcher.Main.invokeFramework(Unknown Source)

at org.eclipse.equinox.launcher.Main.basicRun(Unknown Source)

at org.eclipse.equinox.launcher.Main.run(Unknown Source)

at org.eclipse.equinox.launcher.Main.main(Unknown Source)

|------------>
| From: |
|------------>

--------------------------------------------------------------------------------------------------------------------------------------------------|

|Mike Hockings <hockings@xxxxxxxxxx> |

--------------------------------------------------------------------------------------------------------------------------------------------------|

|------------>
| To: |
|------------>

--------------------------------------------------------------------------------------------------------------------------------------------------|

|Rational Developer for IBM i / Websphere Development Studio Client for
System i & iSeries <wdsci-l@xxxxxxxxxxxx> |

--------------------------------------------------------------------------------------------------------------------------------------------------|

|------------>
| Date: |
|------------>

--------------------------------------------------------------------------------------------------------------------------------------------------|

|05/12/2010 09:07 PM |

--------------------------------------------------------------------------------------------------------------------------------------------------|

|------------>
| Subject: |
|------------>

--------------------------------------------------------------------------------------------------------------------------------------------------|

|Re: [WDSCI-L] Error message when compiling SQLRPGLE |

--------------------------------------------------------------------------------------------------------------------------------------------------|

FWIW, you may wish to consider moving to RDp 7.6 as I think you will see
relief for this wee problem sooner there.

But I have been known to be wrong.

Mike

Mike Hockings, P.Eng.
IBM Rational Developer for System z
IBM Canada Ltd. Laboratory
hockings@xxxxxxxxxx
voice 1-905-413-3199 T/L 313-3199 ITN 23133199
http://www.ibm.com/software/rational/cafe/community/hats

wdsci-l-bounces@xxxxxxxxxxxx wrote on 05/12/2010 01:53:46 PM:

[image removed]

Re: [WDSCI-L] Error message when compiling SQLRPGLE

John_Maassel

to:

Rational Developer for IBM i/Websphere Development Studio Client for
System i & iSeries

05/12/2010 02:11 PM

Sent by:

wdsci-l-bounces@xxxxxxxxxxxx

Please respond to Rational Developer for IBM i / Websphere
Development Studio Client for System i & iSeries

Right, it's still compiling.

I did a bit more research on the issue and found that it only does that
when a copybook is included. I took out the only copybook that one of my

programs included and the message stopped. The convenience of the /copy

outweighs the issue of pressing Enter every compile.

I'll let our RDp users know that it's still open.

Thanks,
--
John Maassel
IBM i Programmer/Analyst
Bob Evans Farms, Inc
john_maassel@xxxxxxxxxxxx

Mike Hockings <hockings@xxxxxxxxxx>
Sent by: wdsci-l-bounces@xxxxxxxxxxxx
05/12/2010 11:32 AM
Please respond to
Rational Developer for IBM i / Websphere Development Studio Client for
System i & iSeries <wdsci-l@xxxxxxxxxxxx>

To
Rational Developer for IBM i / Websphere Development Studio Client for
System i & iSeries <wdsci-l@xxxxxxxxxxxx>
cc

Subject
Re: [WDSCI-L] Error message when compiling SQLRPGLE

Ah, you are right. I opened an APAR for it so I presumed that it was
fixed right away, ha ha. For RDp 7.5 it is APAR SE42041 and it is

still

open. Unfortunately I do not have an ETA for a fix at this time.

I don't think that it inhibits the compilation at all, just gives you a
message.

Mike

Mike Hockings, P.Eng.
IBM Rational Developer for System z
IBM Canada Ltd. Laboratory
hockings@xxxxxxxxxx
voice 1-905-413-3199 T/L 313-3199 ITN 23133199
http://www.ibm.com/software/rational/cafe/community/hats

From:
John_Maassel@xxxxxxxxxxxx
To:
wdsci-l@xxxxxxxxxxxx
Date:
12/05/2010 08:51 AM
Subject:
Re: [WDSCI-L] Error message when compiling SQLRPGLE
Sent by:
wdsci-l-bounces@xxxxxxxxxxxx

I can find an RDi 7.5.0.5, but not RDp at that version. I've noticed

that

most of IBM's web site doesn't know that package exists. Installation
Manager doesn't see any updates available. Is this something I have to

get

through Entitlement?

Thanks,
--
John Maassel
IBM i Programmer/Analyst
Bob Evans Farms, Inc
john_maassel@xxxxxxxxxxxx
614-492-7413
Fax: 614-497-4315

date: Tue, 11 May 2010 17:37:11 -0400
from: Mike Hockings <hockings@xxxxxxxxxx>
subject: Re: [WDSCI-L] Error message when compiling SQLRPGLE

Update to RDp 7.5.0.5

Mike

Mike Hockings, P.Eng.
IBM Rational Developer for System z
IBM Canada Ltd. Laboratory
hockings@xxxxxxxxxx
voice 1-905-413-3199 T/L 313-3199 ITN 23133199
http://www.ibm.com/software/rational/cafe/community/hats

From:
John_Maassel@xxxxxxxxxxxx
To:
wdsci-l@xxxxxxxxxxxx
Date:
05/11/2010 05:14 PM
Subject:
[WDSCI-L] Error message when compiling SQLRPGLE
Sent by:
wdsci-l-bounces@xxxxxxxxxxxx

The trial license on my RDi ran out, so we were told to grab the RDP

demo

and use that until we order the permanent keys in the new fiscal year. I

removed RDi and installed RDP. Because I had a project with a lot of
custom member filters, I told RDP to use the workspace files created by
RDi. My filters and commands imported properly, but there is a little
annoyance.

Now, (most of the time) whenever I compile a SQLRPGLE program, I get a
popup window labeled "EVENTS FILE PROCESSINGE" with the following

message:

"The ID field of the FILEEND event does not match the ID field of the

last

SourceLineRange."

When I click Details, I see:
Mismatched IDs: FILEID: 004 FILEEND: FILEEND 0 001

000000

Our other RDP beta users do not see this message. I'm on version 7.5.0

RDP and i5/OS V5R4.

Any ideas on how to get rid of this message? Is it related to using the
existing RDi workspace?
Thanks,
--
John Maassel
IBM i Programmer/Analyst
Bob Evans Farms, Inc
--
This is the Rational Developer for IBM i / Websphere Development Studio
Client for System i & iSeries (WDSCI-L) mailing list
To post a message email: WDSCI-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/wdsci-l
or email: WDSCI-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/wdsci-l.

------------------------------

message: 6
date: Tue, 11 May 2010 17:41:06 -0400
from: Mike Hockings <hockings@xxxxxxxxxx>
subject: Re: [WDSCI-L] RDP 7.6 Under Windows 7

If you try to update with IIM are you at the most current service pack

for

RDp ?

Mike

Mike Hockings, P.Eng.
IBM Rational Developer for System z
IBM Canada Ltd. Laboratory
hockings@xxxxxxxxxx
voice 1-905-413-3199 T/L 313-3199 ITN 23133199
http://www.ibm.com/software/rational/cafe/community/hats

From:
MattLavinder@xxxxxxxxxxxxxxxxxxx
To:
wdsci-l@xxxxxxxxxxxx
Date:
05/11/2010 11:51 AM
Subject:
[WDSCI-L] RDP 7.6 Under Windows 7
Sent by:
wdsci-l-bounces@xxxxxxxxxxxx

Just got Windows 7. We downloaded a trial of RDP 7.6 which is supposed

be supported on Windows 7 . We are still running IBM i 5.4 on our

server,

and I get the following message when I compile an SQLRPGLE program:

The ID field of the FILEEND event does not match the ID field of the

last

SourceLineRange.

Details: Mismatched IDs: FILEID: 013 FILEEND: FILEEND 0

001

000000

I tried compiling an RPGLE and DO NOT get the same message. Maybe RDP

looking for something in the program/job output that isn't present in

5.4?

It doesn't prevent anything from working, but it is definitely

annoying.

Looking for suggestions.

I am also getting an error when trying to open a "new" source member.

When

I try to open a member I know is not there, RDP would usually prompt to
create it. Instead I am getting a message "An unexpected exception has
occurred". Again, I can work around it, but it is annoying.

Here is the stack track of the "unexpected exception":

http://code.midrange.com/1b83cc767a.html

Matt

______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
______________________________________________________________________
--
This is the Rational Developer for IBM i / Websphere Development Studio
Client for System i & iSeries (WDSCI-L) mailing list
To post a message email: WDSCI-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/wdsci-l
or email: WDSCI-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/wdsci-l.

------------------------------

--
This is the Rational Developer for IBM i / Websphere Development Studio
Client for System i & iSeries (WDSCI-L) digest list
To post a message email: WDSCI-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/wdsci-l>
or email: WDSCI-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/wdsci-l.

End of WDSCI-L Digest, Vol 8, Issue 162
***************************************

--
This is the Rational Developer for IBM i / Websphere Development Studio
Client for System i & iSeries (WDSCI-L) mailing list
To post a message email: WDSCI-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/wdsci-l>
or email: WDSCI-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/wdsci-l.

--
This is the Rational Developer for IBM i / Websphere Development Studio
Client for System i & iSeries (WDSCI-L) mailing list
To post a message email: WDSCI-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/wdsci-l
or email: WDSCI-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/wdsci-l.

--
This is the Rational Developer for IBM i / Websphere Development
Studio Client for System i & iSeries (WDSCI-L) mailing list
To post a message email: WDSCI-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/wdsci-l
or email: WDSCI-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/wdsci-l.

--
This is the Rational Developer for IBM i / Websphere Development Studio
Client for System i & iSeries (WDSCI-L) mailing list
To post a message email: WDSCI-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/wdsci-l
or email: WDSCI-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/wdsci-l..