Re: using zendserver toolkit -- WEB400

Alan. No, it's not obvious at all. Thank you. That might be the problem.
I'm not at work now but I know that I am using *local. The iasp name is
iasp1. Is that what I use for the connection or do I need to add an entry
with wrkrbddire

Sent from my iPhone

On Sep 2, 2014, at 8:09 PM, "Alan Seiden" <alan@xxxxxxxxxxxxxx> wrote:

Larry,

This may sound obvious, but make sure you specify the iASP's database
name (from WRKRDBDIRE) when you connect to the toolkit (instead of
*LOCAL), just as you would with a db2 connection. In my experience,
that's all I've had to do.

Earlier you pasted in some program-calling code but not the
getInstance() connection code, so I couldn't see what you tried.

Best regards,
Alan

Vernon Hamberg wrote:

Hi Larry

I looked at the help text for SETASPGRP - it mentions some
restrictions as to the kinds of jobs where this command cannot be used
- like QLUS and QPFRADJ and others, and some host server jobs,
although not HTTP server jobs that I could see.

I don't remember - did you formerly have this particular library in
*SYSBAS?

I would try merely adding a container to your httpd.conf for the
library in that IASP - so it would be like what I showed below.

Assume that your IASP is named IASP01 and the library is called MYLIB
- then this would be the container directive -

<Directory /IASP01/QSYS.LIB/MYLIB.LIB/>
order allow,deny
allow from all
</Directory>

This might be enough to make Apache set the ASP group. You are not
using this for CGI, that's PHP's job, as I understand it. All you want
is to get the libraries from the IASP to be in the library namespace.

You might even, for security, be able to use "deny from all" instead
of "allow from all" - because you are not using these resources from
the Apache job - MAYBE!!

The only reason for using this is to get the ASP group set for the
rest of the job. Worth a try, eh?

Does ANYbody at Zend have anything to say in this regard? I'm really
scratching from the outside, man!

HTH
Vern

On 8/27/2014 8:07 AM, Larry Kleinman wrote:

Vern and Jim

Thanks for the helpful suggestions. To clarify, my issue is that my

PHP

script calls an RPG program, If the program, or any of the files
used by
the program, is in a library in the iASP, then it does not work. I
tried
getting around this by having script call a CL program to do a

SETASPGRP

and then have that program call my RPG program, but I get a message
in the
job log that says that a SETASPGRP can not be run from a system
program. I
have not yet tried doing a SETASPGRP directly from the PHP script, but

suspect that the same thing will happen.

I'd like to follow up on both of your suggestions. Jim - can you
send me
a sample of the routing program that you mentioned. Vern - can you

give

me some more details about how you changed the apache config file to
make
this happen automatically.

Thanks to both of you!

Larry Kleinman
Kleinman Associates, Inc.
212-949-6469

From: Vernon Hamberg <vhamberg@xxxxxxxxxxxxxxx>
To: "Web Enabling the IBM i (AS/400 and iSeries)"
<web400@xxxxxxxxxxxx>,
Date: 08/27/2014 08:51 AM
Subject: Re: [WEB400] using zendserver toolkit
Sent by: "WEB400" <web400-bounces@xxxxxxxxxxxx>

Hi Jim

Apache has executed the SETASPGRP command (apologies for misspelling

the

command as CHGASPGRP) - or maybe something like it - since IASP support
came out in V5R2 - I saw this behavior when I put the RJS WebDocs
product library into an IASP. Now this was for CGI stuff, so I can't
speak to other areas.

What it took was a couple directives that simply used the IFS path to
the library through the IASP directory, as here -

<Directory /IASP01/QSYS.LIB/RJSIMAGE.LIB/>

There was also a <ScriptAliasMatch> for the CGI program, which also
required the /IASP01 (or whatever directory was used for the IASP) in
the path name of the program.

That's all it took - and in the job log for the CGI connection, there
was a message that said the ASP group was changed - no user programming
needed at all.

HTH
Vern

On 8/27/2014 7:05 AM, Jim Oberholtzer wrote:

How/where is Apache going to be smart enough to issue a CHGASPGRP

command?

I think what was happening is the relational database entry for the
iASP
database was used to do the SQL connect to the database. I could be

wrong

but I'll bet a round of drinks at COMMON Fall conference that Apache

(V7R1)

cannot do a CHGASPGRP "automatically", without some customer code to

it

with. I know the Zend Server won't do it automatically (unless Zend
put
that into version 7 but I highly doubt it's there).

BTW: I would not want Apache to do a CHGASPGRP without some sort of
directive telling it to.....

V7R2 is a different discussion but I think this is all V7R1.

--
Jim Oberholtzer
Chief Technical Architect
Agile Technology Architects

-----Original Message-----
From: WEB400 [mailto:web400-bounces@xxxxxxxxxxxx] On Behalf Of Vernon
Hamberg
Sent: Tuesday, August 26, 2014 2:23 PM
To: Web Enabling the IBM i (AS/400 and iSeries)
Subject: Re: [WEB400] using zendserver toolkit

Someone at Zend would have to confirm this, but it might not be

necessary to

change any JOBDs - it is not required when using an Apache instance by
itself. The httpd.conf file can contain a directory directive that

merely

names the directory or library that is in the IASP, and the Apache

server

automatically does a CHGASPGRP.

Whether this happens with Zend, I don't know. It might be worth it,

though,

to add a container section in your httpd.conf file that specifies the

IASP

directory in question something like /IASP02/yourfolder.

I did this when working at RJS Software, with a regular Apache
instance,

to

demonstrate that one of their products works in IASPs. It was magical
- not well-documented, as I recall, although one COULD ferret out the
details by combining info from a couple places.

HTH
Vern

On 8/26/2014 1:52 PM, Larry Kleinman wrote:

geesh, what a pain in the snoot!

i'm scared to death to change the apache jobd. i might just put
everything i need into SYSBASE instead.

however, i'm not afraid of routing programs. how did you do
something
that only affects the apache server for zend?

Larry Kleinman
Kleinman Associates, Inc.
212-949-6469

From: "Jim Oberholtzer" <midrangel@xxxxxxxxxxxxxxxxx>
To: "'Web Enabling the IBM i $AS/400 and iSeries$'"
<web400@xxxxxxxxxxxx>,
Date: 08/26/2014 02:47 PM
Subject: Re: [WEB400] using zendserver toolkit
Sent by: "WEB400" <web400-bounces@xxxxxxxxxxxx>

The job description for the Zend apache instance defaults to :
QHTTPSVR/QZHBHTTP.
The job description for the Zend Server defaults to:
ZENDSVR/ZSVR_JOBD.

The Zend job description is not a big deal to change, but, be really
careful with the IBM default QZHBHTTP. That change could break
things.

At V7R2 you can determine the entire work management environment from
the httpd.conf file. So now you can customize the job description,

subsystem,

memory pool used etc. by individual Apache instance. In V7R1, I've

had

to
resort to using a routing program for QHTTPSVR subsystem to control

that.

I don't think there is any plan to PTF the work management changes to
V7R1 but it would be cool if it happened.

--
Jim Oberholtzer
Chief Technical Architect
Agile Technology Architects

-----Original Message-----
From: WEB400 [mailto:web400-bounces@xxxxxxxxxxxx] On Behalf Of Larry
Kleinman
Sent: Tuesday, August 26, 2014 1:37 PM
To: Web Enabling the IBM i (AS/400 and iSeries)
Cc: WEB400
Subject: Re: [WEB400] using zendserver toolkit

I agree, What is the JOBD used by Zend and by the Apache server?

Larry Kleinman
Kleinman Associates, Inc.
212-949-6469

From: "Jim Oberholtzer" <midrangel@xxxxxxxxxxxxxxxxx>
To: "'Web Enabling the IBM i $AS/400 and iSeries$'"
<web400@xxxxxxxxxxxx>,
Date: 08/26/2014 02:34 PM
Subject: Re: [WEB400] using zendserver toolkit
Sent by: "WEB400" <web400-bounces@xxxxxxxxxxxx>

It likely is not. The user that runs the web server needs the iASP

its job.

Check out the job description used by Zend Server and the Apache

instance.

WARNING: If the iASP is not up and running by the time you start the
web server after this change, the web server will die, and not tell
you

why.

Took me 2 days of head scratching to figure that one out.

--
Jim Oberholtzer
Chief Technical Architect
Agile Technology Architects

-----Original Message-----
From: WEB400 [mailto:web400-bounces@xxxxxxxxxxxx] On Behalf Of Larry
Kleinman
Sent: Tuesday, August 26, 2014 1:31 PM
To: Web Enabling the IBM i (AS/400 and iSeries)
Cc: WEB400
Subject: Re: [WEB400] using zendserer toolkit

An update - the problem is related to the fact that the library that

am

trying to access is in an IASP. The user profile with which I am
connecting has a JOBD that specifies that IASP, but is this the JOBD
under which the job is actually running?

Larry Kleinman
Kleinman Associates, Inc.
212-949-6469

From: Alan Seiden <alan@xxxxxxxxxxxxxx>
To: "Web Enabling the IBM i (AS/400 and iSeries)"
<web400@xxxxxxxxxxxx>,
Cc: WEB400 <web400-bounces@xxxxxxxxxxxx>
Date: 08/26/2014 01:06 PM
Subject: Re: [WEB400] using zendserer toolkit
Sent by: "WEB400" <web400-bounces@xxxxxxxxxxxx>

Larry, here's a sample that might get you started. I am providing

this

one because it's complete, has error checking on the connect, and has
the "require_once" statement that you are probably missing now.

Remove

the references to procedures/functions/return variables if they don't
apply to your program.

http://www.alanseiden.com/2012/12/27/service-program-procedures-with-p

hp-too

lkit-for-ibm-i/

Best,
Alan
--
*Alan Seiden Consulting LLC*
PHP for IBM i expertise and advocacy

*Learn high-performance PHP on IBM i:*
* Let your Apps Fly with PHP on IBM i
<

http://iprodeveloper.com/let-your-php-apps-fly-ibm-i-high-performance-

php-de

mand?promo=WP003XOE

Project leader, Zend PHP Toolkit for IBM i Zend Framework certified
contributor

Office: 201-447-2437 Cell: 201-248-4704 http://www.alanseiden.com |
alan@xxxxxxxxxxxxxx http://twitter.com/alanseiden

Larry Kleinman wrote:

Thanks for the links. I am still having a problem. First off, I

don't

see any samples at all. Nothing is in zendsvr6/htdocs except

index.html,

dummy.php, and two Zend5250 directories. Also, i get a "class not

found"

message for $ToolkitServiceObj = ToolkitService::getInstance($db,

$user,

$pass);

Larry Kleinman
Kleinman Associates, Inc.
212-949-6469

From: Mike Pavlak<mike.p@xxxxxxxx>
To: "Web Enabling the IBM i (AS/400 and iSeries)"
<web400@xxxxxxxxxxxx>,
Date: 08/25/2014 06:32 PM
Subject: Re: [WEB400] using zendserer toolkit
Sent by: "WEB400"<web400-bounces@xxxxxxxxxxxx>

And here:

https://www.zend.com/en/user/login?redirect=/en/webinars/recorded/show

/293

_the+php+toolkit+from+zend+and+ibm

And here:https://github.com/zendtech/IbmiToolkit

And here:http://www.alanseiden.com/toolkit/

And more information available at the following events, maybe near

you?

Hands On Workshops:
http://www.omniuser.org/TechConf2014Reg.html
http://systemideveloper.com/summit/conferences.html
http://www.data3.se/?page_id=2710

Presentations:
http://zendcon.com/
http://www.common.org/index.php/fall-conference-and-expo.html

Regards,

Mike Pavlak
Cell: (408)679-1011 Office: (708)233-5880

-----Original Message-----
From: WEB400 [mailto:web400-bounces@xxxxxxxxxxxx] On Behalf Of Larry
Kleinman
Sent: Monday, August 25, 2014 3:16 PM
To: Web Enabling the IBM i (AS/400 and iSeries)
Subject: Re: [WEB400] using zendserer toolkit

Thanks. Just what I was looking for

Larry Kleinman
Kleinman Associates, Inc.
212-949-6469

From: Michael Ryan<michaelrtr@xxxxxxxxx>
To: "Web Enabling the IBM i (AS/400 and iSeries)"
<web400@xxxxxxxxxxxx>,
Date: 08/25/2014 03:08 PM
Subject: Re: [WEB400] using zendserer toolkit
Sent by: "WEB400"<web400-bounces@xxxxxxxxxxxx>

And maybe this specifically for the Toolkit...

http://files.zend.com/help/Zend-Server-6.3-IBMi/zend-server.htm#php_to

olki

t_xml_service_functions.htm

On Mon, Aug 25, 2014 at 2:36 PM, Larry
Kleinman<larry@xxxxxxxxxxxxxxxxx>
wrote:

Hi - I have been using Zend Server for years but am finally going
to switch from the i5_ functions to the tool kit that is part of

the

basic software. I can not find the documentation anywhere on the
Zend site

that

tell me how to do simple stuff like calling an RPG program. Can

someone

point that out to me?

Larry Kleinman
Kleinman Associates, Inc.
212-949-6469
--
This is the Web Enabling the IBM i (AS/400 and iSeries) (WEB400)
mailing list To post a message email:WEB400@xxxxxxxxxxxx To
subscribe, unsubscribe, or change list options,
visit:http://lists.midrange.com/mailman/listinfo/web400
or email:WEB400-request@xxxxxxxxxxxx Before posting, please take a
moment to review the archives at

http://archive.midrange.com/web400.

--
This is the Web Enabling the IBM i (AS/400 and iSeries) (WEB400)
mailing list To post a message email:WEB400@xxxxxxxxxxxx To
subscribe, unsubscribe, or change list options,
visit:http://lists.midrange.com/mailman/listinfo/web400
or email:WEB400-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives at
http://archive.midrange.com/web400.

--
This is the Web Enabling the IBM i (AS/400 and iSeries) (WEB400)
mailing list To post a message email:WEB400@xxxxxxxxxxxx To
subscribe, unsubscribe, or change list options,
visit:http://lists.midrange.com/mailman/listinfo/web400
or email:WEB400-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives at
http://archive.midrange.com/web400.

--
This is the Web Enabling the IBM i (AS/400 and iSeries) (WEB400)
mailing list To post a message email: WEB400@xxxxxxxxxxxx To
subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/web400
or email: WEB400-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives at
http://archive.midrange.com/web400.

--
This is the Web Enabling the IBM i (AS/400 and iSeries) (WEB400)
mailing list To post a message email: WEB400@xxxxxxxxxxxx To
subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/web400
or email: WEB400-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives at
http://archive.midrange.com/web400.

--
This is the Web Enabling the IBM i (AS/400 and iSeries) (WEB400)
mailing
list To post a message email: WEB400@xxxxxxxxxxxx To subscribe,

unsubscribe,

or change list options,
visit: http://lists.midrange.com/mailman/listinfo/web400
or email: WEB400-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives at
http://archive.midrange.com/web400.

--
This is the Web Enabling the IBM i (AS/400 and iSeries) (WEB400) mailing

list

To post a message email: WEB400@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/web400
or email: WEB400-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/web400.