|
You have that in a program, or do you use iSeries Navigator? Rob Berendt -- Group Dekko Services, LLC Dept 01.073 PO Box 2000 Dock 108 6928N 400E Kendallville, IN 46755 http://www.dekko.com Chris Whisonant <Chris.Whisonant@xxxxxxxxxxxxx> Sent by: domino400-bounces+rob=dekko.com@xxxxxxxxxxxx 11/02/2004 01:07 PM Please respond to Lotus Domino on the iSeries / AS400 <domino400@xxxxxxxxxxxx> To Lotus Domino on the iSeries / AS400 <domino400@xxxxxxxxxxxx> cc Fax to Subject Re: Time change It generally is after a crash, but sometimes I do see it happen after normal ends and starts. I always clear the temp stuff when I end the servers. Chris Whisonant Comporium Senior Mid-Range Systems Administrator IBM eServer Certified Systems Expert - iSeries Technical Solutions V5R2 IBM Certified Associate System Administrator - Lotus Notes and Domino 6 803.326.7270 | 803.326.6142 fax domino400-bounces+chris.whisonant=comporium.com@xxxxxxxxxxxx wrote on 11/02/2004 01:02:33 PM: > I thought the problem with the leftover shared memory, etc was only after > the server ends abnormally, such ending them *IMMED or after a crash. I am > having trouble starting both servers at the same time (one of which is > Samtime) on my lightweight i5 520 #8950 and need to look into staggering > them. But I never do the cleanup thing unless there is a crash. > ==================================== > Tom Kreimer > Information Alternatives > > > > The problem with taking the server down and bringing it up after the > change is that if you end multiple "partitions" automatically and bring > them back up, we generally will get memory errors unless we use iSeries > Navigator to clear out all the shared memory. However, according to Walter > > (I believe) there are plans to create an i5/OS command that will clear all > > of the shared mem, semaphores, and kernel message queues. When that > command is available I would be more willing to end and restart the > servers through a batch process. > > Chris Whisonant > Comporium > Senior Mid-Range Systems Administrator > IBM eServer Certified Systems Expert - iSeries Technical Solutions V5R2 > IBM Certified Associate System Administrator - Lotus Notes and Domino 6 > 803.326.7270 | 803.326.6142 fax > > domino400-bounces+chris.whisonant=comporium.com@xxxxxxxxxxxx wrote on > 11/02/2004 10:20:33 AM: > > > Rob, see all the previous posts about how Domino goes haywire and drags > > down the entire iSeries if you change the time while it is running. > > ==================================== > > Tom Kreimer > > Information Alternatives > > > > > > > > Maybe you need to take this over to midrange-l and see what Al Barsa or > > the rest of the group says. > > > > Why would you NOT want it to automatically adjust? > > > > Rob Berendt > > -- > > Group Dekko Services, LLC > > Dept 01.073 > > PO Box 2000 > > Dock 108 > > 6928N 400E > > Kendallville, IN 46755 > > http://www.dekko.com > > > > > > > > > > > > Robert Laing <rlaing@xxxxxxxxx> > > Sent by: domino400-bounces+rob=dekko.com@xxxxxxxxxxxx > > 11/02/2004 08:17 AM > > Please respond to > > Lotus Domino on the iSeries / AS400 <domino400@xxxxxxxxxxxx> > > > > > > To > > Lotus Domino on the iSeries / AS400 <domino400@xxxxxxxxxxxx> > > cc > > > > Fax to > > > > Subject > > Re: Time change > > > > > > > > > > > > > > I believe if the value of QTIMZON is blank then it, in effect, is > > disabled... > > > > Bob > > > > > > > > > > > > > > Chris Whisonant <Chris.Whisonant@xxxxxxxxxxxxx> > > Sent by: domino400-bounces+rlaing=gemko.com@xxxxxxxxxxxx > > 11/02/2004 08:11 AM > > Please respond to > > Lotus Domino on the iSeries / AS400 <domino400@xxxxxxxxxxxx> > > > > > > To > > Lotus Domino on the iSeries / AS400 <domino400@xxxxxxxxxxxx> > > cc > > > > Subject > > Re: Time change > > > > > > > > > > > > > > I was looking through the system values on our i5 system, but I couldn't > > find where to disable the feature. If I recall, there is a data area > that > > controls it and possibly you may possibly be able to disable it. > However, > > nothing I'm finding in the Info. Center states anything about being able > > to disable it. > > > > Chris Whisonant > > Comporium > > Senior Mid-Range Systems Administrator > > IBM eServer Certified Systems Expert - iSeries Technical Solutions V5R2 > > IBM Certified Associate System Administrator - Lotus Notes and Domino 6 > > 803.326.7270 | 803.326.6142 fax > > > > domino400-bounces+chris.whisonant=comporium.com@xxxxxxxxxxxx wrote on > > 11/01/2004 09:36:51 PM: > > > > > I skipped over V5R2, but I don't recall any auto time change mechanism > > in > > > V5R1. Out of all the posts, I'm still not sure how to make the i5 OS > not > > > > > > > change the time automatically! > > > I am well aware of how bad Domino get's screwed up. I was going to try > > the > > > new time-change feature in OpsNav, but i5 OS beat me too it and > changed > > > the time. Not a blip in the logs either. > > > I don't think NNTP will change the time enough for a Daylight savings > > time > > > change, but it hasn't been working for me anyway. I'll check the logs > > out > > > later, though. > > > > > > Tom > > > ==================================== > > > Tom Kreimer > > > Information Alternatives > > > > > > > > > > > > That's been the case prior to V5R3, hasn't it? I'm still on V5R2 and > I > > > thought we ran into it on V5R1. Anyway, since I don't have Domino > > running > > > > > > 24/7, my "solution" was to create a little CL app that shuts down > Domino > > > > > > > prior to the automatic time change and restarts it afterward. I made > > one > > > for the spring change and one for the fall change. > > > > > > Patrick > > > > > > > > > > > > > > > Tom Kreimer <tkreimer@xxxxxxxxxxx> > > > Sent by: domino400-bounces+ptrapp=nex-tech.com@xxxxxxxxxxxx > > > 10/31/2004 09:36 PM > > > Please respond to > > > Lotus Domino on the iSeries / AS400 <domino400@xxxxxxxxxxxx> > > > > > > > > > Anyone else have V5R3 automatically change time for daylight savings > and > > > > > > > throw their Domino servers for a loop? I learned a long time ago not > to > > > > > > > change the time (by much) while Domino was running. Sunday I log on to > > set > > > > > > the time and discover that OS/400 must have set itself, and my Domino > > was > > > dragging, bogging down the whole iSeries. > > > Does anyone know where this is controlled? > > > > > > Tom > > > ==================================== > > > Tom Kreimer > > > Information Alternatives > > > _______________________________________________ > This is the Lotus Domino on the iSeries / AS400 (Domino400) mailing list > To post a message email: Domino400@xxxxxxxxxxxx > To subscribe, unsubscribe, or change list options, > visit: http://lists.midrange.com/mailman/listinfo/domino400 > or email: Domino400-request@xxxxxxxxxxxx > Before posting, please take a moment to review the archives > at http://archive.midrange.com/domino400. > _______________________________________________ This is the Lotus Domino on the iSeries / AS400 (Domino400) mailing list To post a message email: Domino400@xxxxxxxxxxxx To subscribe, unsubscribe, or change list options, visit: http://lists.midrange.com/mailman/listinfo/domino400 or email: Domino400-request@xxxxxxxxxxxx Before posting, please take a moment to review the archives at http://archive.midrange.com/domino400.
As an Amazon Associate we earn from qualifying purchases.
This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].
Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.