|
We run a large Domino Cluster on OS400, Windows and Solaris. We have about 2.5 terabytes worth of Domino Databases in the cluster. Mix of Mail files and Custom Applications. You do need to run extra CLREPL jobs for busy servers to keep the cluster in synch within a reasonable amount of time. The cluster is self managing for the most part. If the primary servers are OS400, they will push the changes to the secondary servers on Windows then you need to limit the number of concurrent CLREPL Jobs and not to tax the Windows servers too much. :) A Cluster replicator Job on Windows can use over 500 MB of RAM concurrently per job. Keep that in mind if you are pushing from windows. I do extract the stats and generate reports to analyze how busy our Domino Cluster is. You can monitor the efficiency of the cluster by collecting the cluster stats and checking for delays, charting over time etc. Here are some examples. Server.ConcurrentTasks.Max = 20 Server.ConcurrentTasks.Waiting = 0 Server.Cluster.OpenRequest.ClusterBusy = 0 You can also monitor the Disk busy and MIPS on Windows to make sure you don't tax it too much. :) You do need to setup the load balancing if you do now want users to failover to the secondary server. Set the server.availablilty index or set the server to restricted etc. For a reboot Interval weekly usually keeps the gremlins at bay. We have a few servers that have been up for months at a time, but weekly is a good practice and allows a window for regular maintenance. Sean http://www.bedbathandbeyond.com domino400-request@xxxxxxxxxxxx Sent by: domino400-bounces+seanmurphy=bedbath.com@xxxxxxxxxxxx 09/21/2005 10:12 AM Please respond to domino400@xxxxxxxxxxxx To domino400@xxxxxxxxxxxx cc Subject Domino400 Digest, Vol 3, Issue 200 Send Domino400 mailing list submissions to domino400@xxxxxxxxxxxx To subscribe or unsubscribe via the World Wide Web, visit http://lists.midrange.com/mailman/listinfo/domino400 or, via email, send a message with subject or body 'help' to domino400-request@xxxxxxxxxxxx You can reach the person managing the list at domino400-owner@xxxxxxxxxxxx When replying, please edit your Subject line so it is more specific than "Re: Contents of Domino400 digest..." Today's Topics: 1. Domino cluster on OS400 and Windows? (Scott Reece) 2. Re: Domino cluster on OS400 and Windows? (Walter Scanlan) 3. Re: Domino cluster on OS400 and Windows? (Scott Reece) 4. Re: Domino cluster on OS400 and Windows? (Walter Scanlan) 5. Re: Domino cluster on OS400 and Windows? (Chris Whisonant) 6. Re: Domino cluster on OS400 and Windows? (Scott Reece) ---------------------------------------------------------------------- message: 1 date: Tue, 20 Sep 2005 14:03:24 -0700 from: Scott Reece <SReece@xxxxxxxxxxxxx> subject: Domino cluster on OS400 and Windows? Does anyone run a Domino clustered environment on both iSeries OS400 and Windows? Any input on this would be great. Yes I know that OS400 is by far the best platform to run Domino on, but as a backup is it OK to have a windows machine clustered with an iSeries machine? Problems, warning etc.... please let me know. Thanks, Scott Reece System Administrator City of Bend sreece@xxxxxxxxxxxxx Office - 541-388-4426 "Once you say you're going to settle for second, that's what happens to you in life. " --JFK ------------------------------ message: 2 date: Tue, 20 Sep 2005 16:07:31 -0500 from: Walter Scanlan <wscanlan@xxxxxxxxxx> subject: Re: Domino cluster on OS400 and Windows? There are no problems running clusters between platforms. If you are setting up for failover or load balancing make sure you have the hardware to support the load. Walter Scanlan Senior Software Engineer Domino & Workplace for iSeries 507-286-6088 wscanlan@xxxxxxxxxx Scott Reece <SReece@xxxxxxxxxxxxx> Sent by: domino400-bounces+wscanlan=us.ibm.com@xxxxxxxxxxxx 09/20/2005 04:03 PM Please respond to Lotus Domino on the iSeries / AS400 To Lotus Domino on the iSeries / AS400 <domino400@xxxxxxxxxxxx> cc Subject Domino cluster on OS400 and Windows? Does anyone run a Domino clustered environment on both iSeries OS400 and Windows? Any input on this would be great. Yes I know that OS400 is by far the best platform to run Domino on, but as a backup is it OK to have a windows machine clustered with an iSeries machine? Problems, warning etc.... please let me know. Thanks, Scott Reece System Administrator City of Bend sreece@xxxxxxxxxxxxx Office - 541-388-4426 "Once you say you're going to settle for second, that's what happens to you in life. " --JFK _______________________________________________ This is the Lotus Domino on the iSeries / AS400 (Domino400) mailing list To post a message email: Domino400@xxxxxxxxxxxx To subscribe, unsubscribe, or change list options, visit: http://lists.midrange.com/mailman/listinfo/domino400 or email: Domino400-request@xxxxxxxxxxxx Before posting, please take a moment to review the archives at http://archive.midrange.com/domino400. ------------------------------ message: 3 date: Tue, 20 Sep 2005 14:10:28 -0700 from: Scott Reece <SReece@xxxxxxxxxxxxx> subject: Re: Domino cluster on OS400 and Windows? Thanks Walter, That is exactly what I needed to hear, is there a technote somewhere that will shed some light on what the hardware should be on the Windows machine compared to our iSeries? Thanks, Scott Reece System Administrator City of Bend sreece@xxxxxxxxxxxxx Office - 541-388-4426 "Once you say you're going to settle for second, that's what happens to you in life. " --JFK Walter Scanlan <wscanlan@xxxxxxx com> To Sent by: Lotus Domino on the iSeries / AS400 domino400-bounces <domino400@xxxxxxxxxxxx> +sreece=ci.bend.o cc r.us@xxxxxxxxxxxx domino400-bounces+wscanlan=us.ibm.c om@xxxxxxxxxxxx, Lotus Domino on the iSeries / AS400 09/20/2005 02:07 <domino400@xxxxxxxxxxxx> PM Subject Re: Domino cluster on OS400 and Windows? Please respond to Lotus Domino on the iSeries / AS400 <domino400@midran ge.com> There are no problems running clusters between platforms. If you are setting up for failover or load balancing make sure you have the hardware to support the load. Walter Scanlan Senior Software Engineer Domino & Workplace for iSeries 507-286-6088 wscanlan@xxxxxxxxxx Scott Reece <SReece@xxxxxxxxxxxxx> Sent by: domino400-bounces+wscanlan=us.ibm.com@xxxxxxxxxxxx 09/20/2005 04:03 PM Please respond to Lotus Domino on the iSeries / AS400 To Lotus Domino on the iSeries / AS400 <domino400@xxxxxxxxxxxx> cc Subject Domino cluster on OS400 and Windows? Does anyone run a Domino clustered environment on both iSeries OS400 and Windows? Any input on this would be great. Yes I know that OS400 is by far the best platform to run Domino on, but as a backup is it OK to have a windows machine clustered with an iSeries machine? Problems, warning etc.... please let me know. Thanks, Scott Reece System Administrator City of Bend sreece@xxxxxxxxxxxxx Office - 541-388-4426 "Once you say you're going to settle for second, that's what happens to you in life. " --JFK _______________________________________________ This is the Lotus Domino on the iSeries / AS400 (Domino400) mailing list To post a message email: Domino400@xxxxxxxxxxxx To subscribe, unsubscribe, or change list options, visit: http://lists.midrange.com/mailman/listinfo/domino400 or email: Domino400-request@xxxxxxxxxxxx Before posting, please take a moment to review the archives at http://archive.midrange.com/domino400. _______________________________________________ This is the Lotus Domino on the iSeries / AS400 (Domino400) mailing list To post a message email: Domino400@xxxxxxxxxxxx To subscribe, unsubscribe, or change list options, visit: http://lists.midrange.com/mailman/listinfo/domino400 or email: Domino400-request@xxxxxxxxxxxx Before posting, please take a moment to review the archives at http://archive.midrange.com/domino400. ------------------------------ message: 4 date: Tue, 20 Sep 2005 16:38:35 -0500 from: Walter Scanlan <wscanlan@xxxxxxxxxx> subject: Re: Domino cluster on OS400 and Windows? Scott, Not a good answer here. The hardware requirement will be driven by workload. So on iSeries the WLE can be used to define the required hardware, No such tool exists for intel servers. I use this rule of thumb. (SWAG) 1 windows server for each DPAR on iSeries (so this may be a one to many cluster) If you are running current iSeries hardware (i520,i550etc) 3 Intel CPUs for each iSeries CPU should work ok. Example. An i520(2-way) with 4 DPAR, (Mail1, Mail2 , Apps1 HUB1) would be clustered to 4 intel systems Mail1a 2 cpu Mail2a 2 cpu Apps2a 1 cpu Hub1a 1 cpu I generally just run 2 GB of ram on intel servers. Workloads vary and Mail1&2 might drive 80% of the load in which case they may need more CPU NONE of this should be taken as sizing recommendations. Walter Scanlan Senior Software Engineer Domino & Workplace for iSeries 507-286-6088 wscanlan@xxxxxxxxxx Scott Reece <SReece@xxxxxxxxxxxxx> Sent by: domino400-bounces+wscanlan=us.ibm.com@xxxxxxxxxxxx 09/20/2005 04:10 PM Please respond to Lotus Domino on the iSeries / AS400 To Lotus Domino on the iSeries / AS400 <domino400@xxxxxxxxxxxx> cc Subject Re: Domino cluster on OS400 and Windows? Thanks Walter, That is exactly what I needed to hear, is there a technote somewhere that will shed some light on what the hardware should be on the Windows machine compared to our iSeries? Thanks, Scott Reece System Administrator City of Bend sreece@xxxxxxxxxxxxx Office - 541-388-4426 "Once you say you're going to settle for second, that's what happens to you in life. " --JFK Walter Scanlan <wscanlan@xxxxxxx com> To Sent by: Lotus Domino on the iSeries / AS400 domino400-bounces <domino400@xxxxxxxxxxxx> +sreece=ci.bend.o cc r.us@xxxxxxxxxxxx domino400-bounces+wscanlan=us.ibm.c om@xxxxxxxxxxxx, Lotus Domino on the iSeries / AS400 09/20/2005 02:07 <domino400@xxxxxxxxxxxx> PM Subject Re: Domino cluster on OS400 and Windows? Please respond to Lotus Domino on the iSeries / AS400 <domino400@midran ge.com> There are no problems running clusters between platforms. If you are setting up for failover or load balancing make sure you have the hardware to support the load. Walter Scanlan Senior Software Engineer Domino & Workplace for iSeries 507-286-6088 wscanlan@xxxxxxxxxx Scott Reece <SReece@xxxxxxxxxxxxx> Sent by: domino400-bounces+wscanlan=us.ibm.com@xxxxxxxxxxxx 09/20/2005 04:03 PM Please respond to Lotus Domino on the iSeries / AS400 To Lotus Domino on the iSeries / AS400 <domino400@xxxxxxxxxxxx> cc Subject Domino cluster on OS400 and Windows? Does anyone run a Domino clustered environment on both iSeries OS400 and Windows? Any input on this would be great. Yes I know that OS400 is by far the best platform to run Domino on, but as a backup is it OK to have a windows machine clustered with an iSeries machine? Problems, warning etc.... please let me know. Thanks, Scott Reece System Administrator City of Bend sreece@xxxxxxxxxxxxx Office - 541-388-4426 "Once you say you're going to settle for second, that's what happens to you in life. " --JFK _______________________________________________ This is the Lotus Domino on the iSeries / AS400 (Domino400) mailing list To post a message email: Domino400@xxxxxxxxxxxx To subscribe, unsubscribe, or change list options, visit: http://lists.midrange.com/mailman/listinfo/domino400 or email: Domino400-request@xxxxxxxxxxxx Before posting, please take a moment to review the archives at http://archive.midrange.com/domino400. _______________________________________________ This is the Lotus Domino on the iSeries / AS400 (Domino400) mailing list To post a message email: Domino400@xxxxxxxxxxxx To subscribe, unsubscribe, or change list options, visit: http://lists.midrange.com/mailman/listinfo/domino400 or email: Domino400-request@xxxxxxxxxxxx Before posting, please take a moment to review the archives at http://archive.midrange.com/domino400. _______________________________________________ This is the Lotus Domino on the iSeries / AS400 (Domino400) mailing list To post a message email: Domino400@xxxxxxxxxxxx To subscribe, unsubscribe, or change list options, visit: http://lists.midrange.com/mailman/listinfo/domino400 or email: Domino400-request@xxxxxxxxxxxx Before posting, please take a moment to review the archives at http://archive.midrange.com/domino400. ------------------------------ message: 5 date: Wed, 21 Sep 2005 08:01:08 -0400 from: Chris Whisonant <Chris.Whisonant@xxxxxxxxxxxxx> subject: Re: Domino cluster on OS400 and Windows? Thanks for the info Walter! The great thing about Domino clustering is that is is platform-independent. The clustering is done by Domino so the hardware and OS are basically irrelevant other than meeting your system requirements. Chris Whisonant Comporium Senior Mid-Range Systems Administrator IBM eServer Certified Systems Expert - iSeries Technical Solutions V5R2 IBM Certified System Administrator - Lotus Notes and Domino 6/6.5 803.326.7270 | 803.326.6142 fax http://cwhisonant.blogspot.com/ domino400-bounces+chris.whisonant=comporium.com@xxxxxxxxxxxx wrote on 09/20/2005 05:38:35 PM: > Scott, > Not a good answer here. > > The hardware requirement will be driven by workload. So on iSeries the WLE > can be used to define the required hardware, No such tool exists for intel > servers. > I use this rule of thumb. (SWAG) > > 1 windows server for each DPAR on iSeries (so this may be a one to many > cluster) > If you are running current iSeries hardware (i520,i550etc) 3 Intel CPUs > for each iSeries CPU should work ok. > > Example. > > An i520(2-way) with 4 DPAR, (Mail1, Mail2 , Apps1 HUB1) would be clustered > to 4 intel systems > > Mail1a 2 cpu > > Mail2a 2 cpu > > Apps2a 1 cpu > > Hub1a 1 cpu > > I generally just run 2 GB of ram on intel servers. > > Workloads vary and Mail1&2 might drive 80% of the load in which case they > may need more CPU > > > NONE of this should be taken as sizing recommendations. > > > > Walter Scanlan > Senior Software Engineer > Domino & Workplace for iSeries > 507-286-6088 > wscanlan@xxxxxxxxxx > > > > Scott Reece <SReece@xxxxxxxxxxxxx> > Sent by: domino400-bounces+wscanlan=us.ibm.com@xxxxxxxxxxxx > 09/20/2005 04:10 PM > Please respond to > Lotus Domino on the iSeries / AS400 > > > To > Lotus Domino on the iSeries / AS400 <domino400@xxxxxxxxxxxx> > cc > > Subject > Re: Domino cluster on OS400 and Windows? > > > > > > > Thanks Walter, > > That is exactly what I needed to hear, is there a technote somewhere that > will shed some light on what the hardware should be on the Windows machine > compared to our iSeries? > > Thanks, > Scott Reece > System Administrator > City of Bend > sreece@xxxxxxxxxxxxx > Office - 541-388-4426 > > > "Once you say you're going to settle for second, that's what happens to > you > in life. " --JFK > > > > > > Walter Scanlan > <wscanlan@xxxxxxx > com> To > > Sent by: Lotus Domino on the iSeries / AS400 > > domino400-bounces <domino400@xxxxxxxxxxxx> > +sreece=ci.bend.o cc > > r.us@xxxxxxxxxxxx domino400-bounces+wscanlan=us.ibm.c > > om@xxxxxxxxxxxx, Lotus Domino on > the iSeries / AS400 > 09/20/2005 02:07 <domino400@xxxxxxxxxxxx> > PM Subject > > Re: Domino cluster on OS400 and > Windows? > Please respond to > Lotus Domino on > the iSeries / > AS400 > <domino400@midran > ge.com> > > > > > > > There are no problems running clusters between platforms. > > If you are setting up for failover or load balancing make sure you have > the hardware to support the load. > > > Walter Scanlan > Senior Software Engineer > Domino & Workplace for iSeries > 507-286-6088 > wscanlan@xxxxxxxxxx > > > > Scott Reece <SReece@xxxxxxxxxxxxx> > Sent by: domino400-bounces+wscanlan=us.ibm.com@xxxxxxxxxxxx > 09/20/2005 04:03 PM > Please respond to > Lotus Domino on the iSeries / AS400 > > > To > Lotus Domino on the iSeries / AS400 <domino400@xxxxxxxxxxxx> > cc > > Subject > Domino cluster on OS400 and Windows? > > > > > > > Does anyone run a Domino clustered environment on both iSeries OS400 and > Windows? Any input on this would be great. Yes I know that OS400 is by far > the best platform to run Domino on, but as a backup is it OK to have a > windows machine clustered with an iSeries machine? Problems, warning > etc.... please let me know. > > Thanks, > Scott Reece > System Administrator > City of Bend > sreece@xxxxxxxxxxxxx > Office - 541-388-4426 > > > "Once you say you're going to settle for second, that's what happens to > you > in life. " --JFK > > > _______________________________________________ > This is the Lotus Domino on the iSeries / AS400 (Domino400) mailing list > To post a message email: Domino400@xxxxxxxxxxxx > To subscribe, unsubscribe, or change list options, > visit: http://lists.midrange.com/mailman/listinfo/domino400 > or email: Domino400-request@xxxxxxxxxxxx > Before posting, please take a moment to review the archives > at http://archive.midrange.com/domino400. > > > _______________________________________________ > This is the Lotus Domino on the iSeries / AS400 (Domino400) mailing list > To post a message email: Domino400@xxxxxxxxxxxx > To subscribe, unsubscribe, or change list options, > visit: http://lists.midrange.com/mailman/listinfo/domino400 > or email: Domino400-request@xxxxxxxxxxxx > Before posting, please take a moment to review the archives > at http://archive.midrange.com/domino400. > > > > _______________________________________________ > This is the Lotus Domino on the iSeries / AS400 (Domino400) mailing list > To post a message email: Domino400@xxxxxxxxxxxx > To subscribe, unsubscribe, or change list options, > visit: http://lists.midrange.com/mailman/listinfo/domino400 > or email: Domino400-request@xxxxxxxxxxxx > Before posting, please take a moment to review the archives > at http://archive.midrange.com/domino400. > > > _______________________________________________ > This is the Lotus Domino on the iSeries / AS400 (Domino400) mailing list > To post a message email: Domino400@xxxxxxxxxxxx > To subscribe, unsubscribe, or change list options, > visit: http://lists.midrange.com/mailman/listinfo/domino400 > or email: Domino400-request@xxxxxxxxxxxx > Before posting, please take a moment to review the archives > at http://archive.midrange.com/domino400. > ------------------------------ message: 6 date: Wed, 21 Sep 2005 07:09:43 -0700 from: Scott Reece <SReece@xxxxxxxxxxxxx> subject: Re: Domino cluster on OS400 and Windows? Actually that is a great answer for me. I only have 2 DPAR's on our iSeries currently so I will only need 2 Intel server Blades for our SAN (both 2 CPU). I have only ever ran Domino on the iSeries so this is going to be something new for me. What is the restart period suggested for Windows servers running Domino? Weekly? Daily? Thanks, Scott Reece System Administrator City of Bend sreece@xxxxxxxxxxxxx Office - 541-388-4426 "Once you say you're going to settle for second, that's what happens to you in life. " --JFK Walter Scanlan <wscanlan@xxxxxxx com> To Sent by: Lotus Domino on the iSeries / AS400 domino400-bounces <domino400@xxxxxxxxxxxx> +sreece=ci.bend.o cc r.us@xxxxxxxxxxxx domino400-bounces+wscanlan=us.ibm.c om@xxxxxxxxxxxx, Lotus Domino on the iSeries / AS400 09/20/2005 02:38 <domino400@xxxxxxxxxxxx> PM Subject Re: Domino cluster on OS400 and Windows? Please respond to Lotus Domino on the iSeries / AS400 <domino400@midran ge.com> Scott, Not a good answer here. The hardware requirement will be driven by workload. So on iSeries the WLE can be used to define the required hardware, No such tool exists for intel servers. I use this rule of thumb. (SWAG) 1 windows server for each DPAR on iSeries (so this may be a one to many cluster) If you are running current iSeries hardware (i520,i550etc) 3 Intel CPUs for each iSeries CPU should work ok. Example. An i520(2-way) with 4 DPAR, (Mail1, Mail2 , Apps1 HUB1) would be clustered to 4 intel systems Mail1a 2 cpu Mail2a 2 cpu Apps2a 1 cpu Hub1a 1 cpu I generally just run 2 GB of ram on intel servers. Workloads vary and Mail1&2 might drive 80% of the load in which case they may need more CPU NONE of this should be taken as sizing recommendations. Walter Scanlan Senior Software Engineer Domino & Workplace for iSeries 507-286-6088 wscanlan@xxxxxxxxxx Scott Reece <SReece@xxxxxxxxxxxxx> Sent by: domino400-bounces+wscanlan=us.ibm.com@xxxxxxxxxxxx 09/20/2005 04:10 PM Please respond to Lotus Domino on the iSeries / AS400 To Lotus Domino on the iSeries / AS400 <domino400@xxxxxxxxxxxx> cc Subject Re: Domino cluster on OS400 and Windows? Thanks Walter, That is exactly what I needed to hear, is there a technote somewhere that will shed some light on what the hardware should be on the Windows machine compared to our iSeries? Thanks, Scott Reece System Administrator City of Bend sreece@xxxxxxxxxxxxx Office - 541-388-4426 "Once you say you're going to settle for second, that's what happens to you in life. " --JFK Walter Scanlan <wscanlan@xxxxxxx com> To Sent by: Lotus Domino on the iSeries / AS400 domino400-bounces <domino400@xxxxxxxxxxxx> +sreece=ci.bend.o cc r.us@xxxxxxxxxxxx domino400-bounces+wscanlan=us.ibm.c om@xxxxxxxxxxxx, Lotus Domino on the iSeries / AS400 09/20/2005 02:07 <domino400@xxxxxxxxxxxx> PM Subject Re: Domino cluster on OS400 and Windows? Please respond to Lotus Domino on the iSeries / AS400 <domino400@midran ge.com> There are no problems running clusters between platforms. If you are setting up for failover or load balancing make sure you have the hardware to support the load. Walter Scanlan Senior Software Engineer Domino & Workplace for iSeries 507-286-6088 wscanlan@xxxxxxxxxx Scott Reece <SReece@xxxxxxxxxxxxx> Sent by: domino400-bounces+wscanlan=us.ibm.com@xxxxxxxxxxxx 09/20/2005 04:03 PM Please respond to Lotus Domino on the iSeries / AS400 To Lotus Domino on the iSeries / AS400 <domino400@xxxxxxxxxxxx> cc Subject Domino cluster on OS400 and Windows? Does anyone run a Domino clustered environment on both iSeries OS400 and Windows? Any input on this would be great. Yes I know that OS400 is by far the best platform to run Domino on, but as a backup is it OK to have a windows machine clustered with an iSeries machine? Problems, warning etc.... please let me know. Thanks, Scott Reece System Administrator City of Bend sreece@xxxxxxxxxxxxx Office - 541-388-4426 "Once you say you're going to settle for second, that's what happens to you in life. " --JFK _______________________________________________ This is the Lotus Domino on the iSeries / AS400 (Domino400) mailing list To post a message email: Domino400@xxxxxxxxxxxx To subscribe, unsubscribe, or change list options, visit: http://lists.midrange.com/mailman/listinfo/domino400 or email: Domino400-request@xxxxxxxxxxxx Before posting, please take a moment to review the archives at http://archive.midrange.com/domino400. _______________________________________________ This is the Lotus Domino on the iSeries / AS400 (Domino400) mailing list To post a message email: Domino400@xxxxxxxxxxxx To subscribe, unsubscribe, or change list options, visit: http://lists.midrange.com/mailman/listinfo/domino400 or email: Domino400-request@xxxxxxxxxxxx Before posting, please take a moment to review the archives at http://archive.midrange.com/domino400. _______________________________________________ This is the Lotus Domino on the iSeries / AS400 (Domino400) mailing list To post a message email: Domino400@xxxxxxxxxxxx To subscribe, unsubscribe, or change list options, visit: http://lists.midrange.com/mailman/listinfo/domino400 or email: Domino400-request@xxxxxxxxxxxx Before posting, please take a moment to review the archives at http://archive.midrange.com/domino400. _______________________________________________ This is the Lotus Domino on the iSeries / AS400 (Domino400) mailing list To post a message email: Domino400@xxxxxxxxxxxx To subscribe, unsubscribe, or change list options, visit: http://lists.midrange.com/mailman/listinfo/domino400 or email: Domino400-request@xxxxxxxxxxxx Before posting, please take a moment to review the archives at http://archive.midrange.com/domino400. ------------------------------ _______________________________________________ This is the Lotus Domino on the iSeries / AS400 (Domino400) digest list To post a message email: Domino400@xxxxxxxxxxxx To subscribe, unsubscribe, or change list options, visit: http://lists.midrange.com/mailman/listinfo/domino400 or email: Domino400-request@xxxxxxxxxxxx Before posting, please take a moment to review the archives at http://archive.midrange.com/domino400. End of Domino400 Digest, Vol 3, Issue 200 *****************************************
As an Amazon Associate we earn from qualifying purchases.
This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].
Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.
midrange.com
