|
midrange.com
All the new MAPICS features like to end ALL environments.. They should give us
the ability to end specific envs. I have a customer with 5 production envs that
have different backup schedules based on the site. Using the MAPICS backup
stuff, it also ended all the browser jobs..
Wrote my own hold/start ujob program. Wrote my own end all jobs associated with
an env program.
-----Original Message-----
From: mapics-l-bounces@xxxxxxxxxxxx on behalf of Trudie Cook
Sent: Thu 3/11/2004 8:14 AM
To: MAPICS ERP System Discussion
Cc:
Subject: RE: Unattached Jobs
MAPICS has a added a tool to end ujobs this makes holding all ujobs
easy, all you have to do is:
CALL PGM(AMZPDS0R) PARM('' '3' '*ALL')
This will hold all ujobs in all environments. I put AMZPDS0C and
AMZPDS0R in QGPL so that I do not have to worry about the library list. Sorry,
there is no tool I know of for releasing the held jobs. I wrote a small
program that checks the requested status flag and the current status flag in
the UJBCTL file and if both flags are '3' I change them to a '4' this changes
the status to ended instead of held. Most ujobs will then start themselves
when needed.
Trudie Cook
MTD Products
-----Original Message-----
From: mapics-l-bounces+trudie.cook=mtdproducts.com@xxxxxxxxxxxx
[mailto:mapics-l-bounces+trudie.cook=mtdproducts.com@xxxxxxxxxxxx]On
Behalf Of Peter Lefebvre
Sent: Thursday, March 11, 2004 3:39 AM
To: MAPICS ERP System Discussion
Subject: Re: Unattached Jobs
Hi Barry,
I'm using a CL to stop the U* jobs and basically it does the following:
Start-up MAPICS environment: STRMAPICS ENDS(&ENVDES)
MENU(*NONE)
Set-up LDA pos. 242 & 270 with PGM(AXZLDA0R)
End U-job: CALL PGM(AXZSR) PARM(&LDA
&UJKEY1
'*END')
where UJKEY1 can be 'AMI3K' IM BACKFLUSH
TRANS.
UPDATE
'PSVTUP' PDM+ TRANSACTIONS PROCESSING
etc...
End MAPICS environment ENDMAPICS
Peter Lefebvre
Honda Belgium
|---------+----------------------------->
| | "Barry Foxworthy" |
| | <bfoxworthy@erinet|
| | .com> |
| | Sent by: |
| | mapics-l-bounces@m|
| | idrange.com |
| | |
| | |
| | 11/03/2004 04:44 |
| | Please respond to |
| | MAPICS ERP System |
| | Discussion |
| | |
|---------+----------------------------->
>-------------------------------------------------------------------------------------------------------------------------------|
|
|
| To: "MAPICS ERP System Discussion"
<mapics-l@xxxxxxxxxxxx> |
| cc:
|
| Subject: Re: Unattached Jobs
|
>-------------------------------------------------------------------------------------------------------------------------------|
Yes, the jobs need ended while the a save runs. Custom programs build
trdata
via RF devices for PMC transactions and trigger the dataq to update but
the
u-jobs need to be down due to file allocations. Controlling the custom
jobs
and their file allocations that build trdata is not a problem, just
ending
and starting the u-jobs at a specific time. Running 24/7 has as most do
these days has created this challenge. The 'marco' approach may be an
option
but would perfer a custom CL to control the u-jobs but may discuss in
the
future. Thank you for your comments.
Barry
----- Original Message -----
From: <LeLeux@xxxxxxxxxxxx>
To: "MAPICS ERP System Discussion" <mapics-l@xxxxxxxxxxxx>
Sent: Wednesday, March 10, 2004 10:10 PM
Subject: Re: Unattached Jobs
> Is your data collection a backup issue? It was for us unt DCSI.
>
> We use a Rumba macro to 'sense' for awhile. Works
> I'd be happy to elaborate if necessa -----mapics-l-bounces@mi
> To: "MAPICS ERP System Discussion" &l From: "Barry Foxworthy"
<bfoxworthy@erine Sent by: mapics-l-bounces@xxxxxxxxxxxx
> Date: 03/10/2004 05: Subject: Unattached Jobs
>
> G
> Would anyone in the group care to comment on a process the
background
u-jobs. I'm sure this is an age old issue starting, holding or
stopping
are issues with the daily an Is it possible to schedule a job to hold
or
stop them prior running and then release or re-start them? Has this
been
addresse custom programming?
>
> Thanks
> Barry Foxworthy
> ___ _________________________ ___________________
> This is the MA To post a message ema To subscribe,
unsubscribe, or
change list opti visit:
http://lists.midrange.com/mailman/listinfo/mapics-l<
MAPICS-L-request@xxxxxxxxxxxx
> Before posting, please take a at
http://archive.midrange.com/mapics-l.
>
> _______________________________________________
> This is the MAPICS ERP System Discussion (MAPICS-L) mailing list
> To post a message email: MAPICS-L@xxxxxxxxxxxx
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/mailman/listinfo/mapics-l
> or email: MAPICS-L-request@xxxxxxxxxxxx
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/mapics-l.
>
>
>
_______________________________________________
This is the MAPICS ERP System Discussion (MAPICS-L) mailing list
To post a message email: MAPICS-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/mapics-l
or email: MAPICS-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/mapics-l.
The information contained in this communication is confidential and may
be
legally privileged. It is intended solely for the use of the individual
or
the entity to whom it is addressed and others authorised to receive it.
If
you have received it by mistake, please let the sender know by e-mail
reply
and delete it from your system.
If you are not the intended recipient you are hereby notified that any
disclosure, copying, distribution or taking any action in reliance of
the
contents of this information is strictly prohibited and may be
unlawful.
Honda Belgium NV is neither liable for the proper and complete
transmission
of the information contained in this communication nor for any delay in
its
receipt.
_______________________________________________
This is the MAPICS ERP System Discussion (MAPICS-L) mailing list
To post a message email: MAPICS-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/mapics-l
or email: MAPICS-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/mapics-l.
_______________________________________________
This is the MAPICS ERP System Discussion (MAPICS-L) mailing list
To post a message email: MAPICS-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/mapics-l
or email: MAPICS-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/mapics-l.
As an Amazon Associate we earn from qualifying purchases.
This mailing list archive is Copyright 1997-2025 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].
Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.
