RE: Entire RAID set non-reporting

[Jim Knight <jknight@xxxxxxx>]

We had the same problem on our 720.  It ended 
up being the optical connectors had been damaged
when someone was working under the floor.  Possible?
jk

-----Original Message-----
From: Douglas Handy [mailto:dhandy1@bellsouth.net]
Sent: Wednesday, December 20, 2000 4:41 PM
To: MIDRANGE-L@midrange.com
Subject: Re: Entire RAID set non-reporting


Chris,

>Check the power supply for the 8 drives.  It probably died.  The 40s has 2
>or 3 power supplies.

I did measure it at the drives -- I'm reading about 12.24V and 5.04V at the
plugs to the drives.  The 7117 power supply also presumably powers my 6502 disk
controller (also in the 7117 with the 8 drives), and I didn't measure the power
at it but DST reports is as "operational" so I assume it has power.

Any other guesses?  Anybody have a reference for the SRC codes I posted which
aren't in my Service Functions manual?

But thanks for the suggestion.

Doug
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---