Re: System Loop ? Help !

["Neil Palmer" <neilp@xxxxxxxxxxx>]

Philipp,

360 mins = 6 hours.  It's only been running for 3.  Am I missing something 
- is this the second IPL after you ran DSKBAL ? 

...Neil 





Philipp Rusch <Philipp.Rusch@rusch-edv.de>
Sent by: owner-midrange-l@midrange.com
2001/02/07 03:26
Please respond to MIDRANGE-L

 
        To:     MIDRANGE-L@midrange.com
        cc: 
        Subject:        Re: System Loop ? Help !


I forgot to mention, that we are on V4R3
and I used the DSKBAL command during the first night to
balance data across the disks.
Parameters were 360 minutes for the first run and then 30 min
on every sucessive IPL.
BUT the system is doing "C600 4257" for 3 hours right now ...
is this normal ?

Philipp


> Hello all,
> We recently added disks to model 400 with a 6502 in extension box.
> Now we have 6x 6606 and 4x 6607 (these are new).
> The first two 6606 disks are a mirror pair at MFIOP for the load source
> the rest is in two RAID sets.
> To add the disk we did stop RAID and mirror, added the new 4  6607s
> and started all over again. Went perfectly ... (monday evening)
> Tuesday all the day running okay, in the night we do a scheduled IPL
> and now the machine is at SRC C600 4257 for hours !
>
> What shall I do ? We need that system ...
>
> Any help much appreciated,
>
> Regards from germany, Philipp Rusch
>




+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---