Re: System Loop ? SOLVED ...

[Philipp Rusch <Philipp.Rusch@xxxxxxxxxxxx>]

Okay, okay , I know that 360 minutes are 6 hours, but I _had_ scheduled
an IPL the first night, so guess what has happened ?
The operator thought it being a good idea to keep the machine up and running
for the next day, because we were that late at that night !   :-))
Not knowing this, Neil, I was a little confused when they called me the other 
day.
Yes, this was the first IPL, then !
And after 6 hours, the machine was happily up and running like it should.
No program errors at all, just humans ...

Thanks for your replies !

Regards from germany, Philipp Rusch


Alexei Pytel schrieb:

> C6004275 is a SLIC IPL Informational SRC - Move Extents Off Load Source.
> 360 minutes is 6 hours. I think you have what you asked for...
>
>     Alexei Pytel
>
> Philipp Rusch <Philipp.Rusch@rusch-edv.de>@midrange.com on 02/07/2001
> 02:26:28 AM
>
> Please respond to MIDRANGE-L@midrange.com
>
> Sent by:  owner-midrange-l@midrange.com
>
> To:   MIDRANGE-L@midrange.com
> cc:
> Subject:  Re: System Loop ? Help !
>
> I forgot to mention, that we are on V4R3
> and I used the DSKBAL command during the first night to
> balance data across the disks.
> Parameters were 360 minutes for the first run and then 30 min
> on every sucessive IPL.
> BUT the system is doing "C600 4257" for 3 hours right now ...
> is this normal ?
>
> Philipp
>
> > Hello all,
> > We recently added disks to model 400 with a 6502 in extension box.
> > Now we have 6x 6606 and 4x 6607 (these are new).
> > The first two 6606 disks are a mirror pair at MFIOP for the load source
> > the rest is in two RAID sets.
> > To add the disk we did stop RAID and mirror, added the new 4  6607s
> > and started all over again. Went perfectly ... (monday evening)
> > Tuesday all the day running okay, in the night we do a scheduled IPL
> > and now the machine is at SRC C600 4257 for hours !
> >
> > What shall I do ? We need that system ...
> >
> > Any help much appreciated,
> >
> > Regards from germany, Philipp Rusch
> >
>
> +---
> | This is the Midrange System Mailing List!
> | To submit a new message, send your mail to MIDRANGE-L@midrange.com.
> | To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
> | To unsubscribe from this list send email to
> MIDRANGE-L-UNSUB@midrange.com.
> | Questions should be directed to the list owner/operator:
> david@midrange.com
> +---
>
> +---
> | This is the Midrange System Mailing List!
> | To submit a new message, send your mail to MIDRANGE-L@midrange.com.
> | To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
> | To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
> | Questions should be directed to the list owner/operator: david@midrange.com
> +---

+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---