RE: RE: RE: RE: 3490 and V5R1

["Andy Nolen-Parkhouse" <aparkhouse@xxxxxxxxx>]

Dave,

Go with the *DEV, and instead of using the generic '*TAP', enter the
specific device description you want to look at.  If I recall from your
earlier posting, that would be TAP03.  The configuration status display
does not show the other information if you have more than one device
selected.

Regards,
Andy Nolen-Parkhouse

> On Behalf Of Dave Snyder
> Subject: Re: RE: RE: RE: 3490 and V5R1
>
> I still do not see the see the controller. If I issue the command:
> WRKCFGSTS CFGTYPE(*CTL) CFGD(*TAP)
>
> I get nothing.
>
> If I issue the command:
> WRKCFGSTS CFGTYPE(*DEV) CFGD(*TAP)
>
> I get:
>                          Work with Configuration Status
> SLFI400
>                                                              09/27/02
> 11:40:23
>  Position to  . . . . .                Starting characters
>
>  Type options, press Enter.
>    1=Vary on   2=Vary off   5=Work with job   8=Work with description
>    9=Display mode status    13=Work with APPN status...
>
>  Opt  Description       Status
-------------Job------------
> --
>       TAP01             VARIED ON
>       TAP02             VARIED ON
>       TAP03             VARIED ON
>       TAP04             VARIED ON
>