RE: LPAR Classes ?

[Glenn Ericson <Glenn-Ericson@xxxxxxx>]

 Hope  you mean replace the  620 with and  820  else ....-> 
Bet  you  discard a lot of the 620 going over as at the 810 
level  SPD  technology is no more. Keeping any old  DASD  that  is  slow 
(LT 10K RPM)  or  slow performing  controllers  will be inhibitors 
towards  the  new system working at optimal levels. Hardware  planning , 
set up and movement  are critical  and  require an assurance review.

The 810 might be a CSU (customer set up) system too. With LPAR  systems 
it  is your  responsibility to also:
        Load all the software (  no pre load from  IBM Plant)
        Place  all the feature  cards and DASD in the proper slots
        to match your  desired  end results.

        Glenn

At 03:05 PM 3/17/2003 -0500, Andy Nolen-Parkhouse wrote:
> Chuck,
>
> Hardware planning for LPAR is very crucial.  Before you order the 810 you
> should have a clear understanding of what you want to do and how that is
> implemented in hardware.  This would include backup strategies for the
> partitions, upgrade plans, networking and communications.  This is not
> something you're likely to do every day so it makes sense to work with a
> vendor who will put in the time to understand your needs and provide you
> with the sense of confidence that you'll be able to accomplish your
> business requirements on the platform that ships.
>
> If you are one of those folks who can learn from printed documentation,
> it would make sense to me that your review the InfoCenter manuals related
> to LPAR and then see if you need more.  There is a lot of clearly written
> stuff from IBM out there on this topic.  If you don't do well with
> documentation, then a course might be beneficial.
>
> Regards
> Andy Nolen-Parkhouse
>
> > On Behalf Of Chuck Lewis
> > Subject: LPAR Classes ?
> >
> > Hi Folks,
> >
> >
> >
> > I'm not sure I know much more about LPAR than to be dangerous and we
> > are
> > looking to upgrade a 620 to an 810 with LPAR.  Should I be looking at
> > attending an LPAR class in Rochester ?
> >
> > Thanks !
> >
> > Chuck
>
>
> _______________________________________________
> This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
> To post a message email: MIDRANGE-L@xxxxxxxxxxxx
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/mailman/listinfo/midrange-l
> or email: MIDRANGE-L-request@xxxxxxxxxxxx
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/midrange-l.