Re: Xerox WC416 won't print landscape

[Paul Tykodi <ptykodi@xxxxxxxxx>]

Hi Brian,

I downloaded the Xerox WC416 Windows Printer Driver
for Win XP and printed a test document to file in
order to see what printer language the device seemed
to be supporting. It looks like it is one of the
special "Windows Printers" so that trying to control
its functionality with the PCL printer language is
liable to not work very well.

This type of "Windows Printer" device can work quite
well with an i5-iSeries-AS/400 host and plain SCS data
if you don't mind setting it up to be supported with a
PC5250 session using a software like iSeries Access or
Client Access Express.

If you were to configure an iSeries Access or Client
Access PC5250 print session to not use Host Print
Transform (uncheck the box Transform Print Data to
ASCII on iSeries or AS/400), the i5 OS - OS/400 EBCDIC
data would be transferred natively from the
i5-iSeries-AS/400 host to the PC running iSeries
Access or Client Access. 

If you also make sure that you do not select the Use
PDT checkbox, iSeries Access or Client Access will
convert your EBCDIC data into a Windows format known
as GDI on the PC running iSeries Access or Client
Access. The GDI format is the generic input format
required by Windows print drivers. In this
configuration, you will be able to use the correct
Xerox Windows print driver to format the
i5-iSeries-AS/400 data and landscape printing will
then be supported.

HTH

Best Regards,

/Paul
--
Paul Tykodi
Principal Consultant
TCS - Tykodi Consulting Services LLC
E-mail: ptykodi@xxxxxxxxxx

>date: Fri, 13 May 2005 10:11:18 -0400
>from: "Pfleghaar, Brian"
<BPfleghaar@xxxxxxxxxxxxxxxx>
>subject: Xerox WC416 won't print landscape
>
>The problem is that I cannot get a Xerox WorkCentre
>Pro 416 to print landscape causing information to get
>cut off the page. I called Xerox in the past about
>this problem and was told the 416 is not supported on
>the AS/400 (we are using V5R2).
>
>They did suggest I try setting HPT to HP5SI which
>didn't solve the problem. I've even tried an HP5SI 
>*WSCST modified to force landscape to no avail. 
> 
>Configuring a tray to print landscape would only work
>for the first page and the remaining pages changed to
>a larger font.
> 
>Anyone ever have any luck getting a Xerox WorkCentre
>Pro416 to work on an AS/400?
> 
>Brian Pfleghaar
>IT Support


                
Yahoo! Mail
Stay connected, organized, and protected. Take the tour:
http://tour.mail.yahoo.com/mailtour.html