RE: SNDNETSPLF not working

["Knezevic, Mihael" <m.knezevic@xxxxxxxx>]

thanx. that was the one thing i searched for ... a log. thanx again. 

> -----Original Message-----
> From: midrange-l-bounces@xxxxxxxxxxxx 
> [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Barton, Mike
> Sent: Monday, January 30, 2006 3:56 PM
> To: Midrange Systems Technical Discussion
> Subject: RE: SNDNETSPLF not working
> 
> Looks like you'll need to start looking here:
> 
> DSPDSTLOG
> 
> Check both sending & receiving machines.
> 
> HTH
> 
> Mike
> 
> >
> 
> >no. under 70%. so that doesn't seem the problem. anything else i can
> check?
> >
> >> -----Original Message-----
> >> From: midrange-l-bounces@xxxxxxxxxxxx 
> >> [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Lapeyre,
> Francis
> >> Sent: Monday, January 30, 2006 3:40 PM
> >> To: 'Midrange Systems Technical Discussion'
> >> Subject: RE: SNDNETSPLF not working
> >> 
> >> 84% should be OK - is the other machine also under 90%? 
> >> 
> >> -----Original Message-----
> >> From: midrange-l-bounces@xxxxxxxxxxxx
> >> [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Knezevic,
> Mihael
> >> Sent: Monday, January 30, 2006 8:12 AM
> >> To: Midrange Systems Technical Discussion
> >> Subject: RE: SNDNETSPLF not working
> >> 
> >> it is 84%. is 90% this a hard limit for not sendig spooled 
> >> files or can it
> >> be configured somewhere? 
> >> 
> >> > -----Original Message-----
> >> > From: midrange-l-bounces@xxxxxxxxxxxx 
> >> > [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of 
> >> Lapeyre, Francis
> >> > Sent: Monday, January 30, 2006 3:06 PM
> >> > To: 'Midrange Systems Technical Discussion'
> >> > Subject: RE: SNDNETSPLF not working
> >> > 
> >> > Is your disk usage approaching 90% on either machine? SNADS 
> >> will stop 
> >> > sending spool files when that happens.
> >> > 
> >> > Francis Lapeyre
> >> > IS Dept. Programmer/Analyst
> >> > Stewart Enterprises, Inc.
> >> > E-mail: flapeyre@xxxxxxxx
> >> > 
> >> > 
> >> > 
> >> > -----Original Message-----
> >> > From: midrange-l-bounces@xxxxxxxxxxxx
> >> > [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of 
> >> Knezevic, Mihael
> >> > Sent: Monday, January 30, 2006 7:04 AM
> >> > To: Midrange Systems Technical Discussion
> >> > Subject: SNDNETSPLF not working
> >> > 
> >> > hi,
> >> > 
> >> > i got a little problem here. we used to transfer spooled 
> files from
> 
> >>
> >>> work anymore 
> >> > and i got no clue why.
> >> > 
> >> > i verified with the command wrkdstq that the spooled file 
> >> is going out 
> >> > from the system but i don't know how to check if it is 
> >> going in on the 
> >> > other system.
> >> > 
> >> > anybody an idea?
> >> > 
> >> > we are on v5r2.
> >> > 
> >> > thx
> >> > 
> >> > mk
> >> > 
> >> > --
> 
> -- 
> 
> 
> -- 
> This is the Midrange Systems Technical Discussion 
> (MIDRANGE-L) mailing list
> To post a message email: MIDRANGE-L@xxxxxxxxxxxx
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/mailman/listinfo/midrange-l
> or email: MIDRANGE-L-request@xxxxxxxxxxxx
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/midrange-l.
> 
>