Re: Two Network cards for redundancy

["Leif Guldbrand" <Guldbrand@xxxxxxxxx>]

Larry,

I played around with your suggestion on my model 270 with V5R1 and
two NIC's, but I dont have an 'advanced tap' to the Proxy Arp box in iNav.

Is Proxy Arp only supported from V5R2 and up ??

Leif
----- Original Message ----- 
From: "Larry Bolhuis"
To: "Midrange Systems Technical Discussion"
Sent: 17. august 2006 17:21
Subject: Re: Two Network cards for redundancy


>   The third IP address must be configured in iNav and is created as a 
> *VIRTUAL IP. You assign that address with a mask of 255.255.255.255. 
> Then on the advanced tab you MUST check the Proxy Arp box and for 
> performance you must assign the frame size to be the smaller of the two 
> lines (in case one is 10/100 at 1492 and the other GbE at 8996 you must 
> use the 1492).
--- s n i p ---
>   - Larry