Re: Problems sending email from AS/400

["Mike Cunningham" <MCUNNING@xxxxxxx>]

try this one
http://www.mail-archive.com/forum.help400@combios.es/msg01259.html

> > > jmmckee@xxxxxxxxxxxxxx 9/5/2006 5:00:31 PM >>>
I have done
ENDMSF followed by
STRMSF MSGOPT(*CLEAR)

Very next mail attempt produces the error.  Seems like a configuration
issue,
but I don't know where to look.

John McKee

Quoting Mike Cunningham <MCUNNING@xxxxxxx>:

> we get this error frequently but had it before and after our 820 to
520
> migration. We usually get them with one of our offices runs a large
> e-mail send and there are invalid addresses in our database. Not
just
> undeliverable but malformed (e.g.
> "mary@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx" - yes this was an actualy
> address entered by one of our students) we usually will purge all
SMTP
> mail when we see a lot of them, usually on system startup. But these
do
> not appear to stop other mail from working
>
> > > > jmmckee@xxxxxxxxxxxxxx 9/5/2006 4:36:13 PM >>>
> We recently (three weeks ago) upgraded from an 820 to a 520.  Ever
> since that
> time, email has not worked.
>
> Specifically, the following message is sent to QSYSOPR:
>
>                        Additional Message Information
>
> Message ID . . . . . . :   CPFAF98       Severity . . . . . . . :  
00
> Message type . . . . . :   Information
> Date sent  . . . . . . :   09/05/06      Time sent  . . . . . . :
> 15:25:26
>
> Message . . . . :   Job 053796/QMSF/QMSF stopped processing MSF
> message.
> Cause . . . . . :   Exit point program QTMSFWD in library QTCP for
exit
> point
>  QIBM_QZMFMSF_MSG_FWD has detected a condition with message ID
>  10F634C0609051525260000000008. The message indicates that
processing
> should
>  be ended. The MSF message will be processed again the next time the
> Start
>  Mail Server Framework (STRMSF) command is used.
> Recovery  . . . :   Determine why the exit point program indicated
> that
>  processing for a message is to be ended. There may be messages
listed
> in the
>  job log that caused the exit point program to fail. Correct the
error
> and
>  use the End Mail Server Framework (ENDMSF) command to end all MSF
> jobs. Then
>  use the Start Mail Server Framework (STRMSF) command to start
> message
>  processing again.
>
> Bottom
> Press Enter to continue.
>
>
>
> This is a section for the MSF joblog:
>
>                         Additional Message Information
>
> Message ID . . . . . . :   TCP5101       Severity . . . . . . . :  
30
> Message type . . . . . :   Diagnostic
> Date sent  . . . . . . :   09/05/06      Time sent  . . . . . . :
> 15:25:26
>
> Message . . . . :   Integrated File System file open failed on file
>   JMCKEE20060905152730
> Cause . . . . . :   The RTCP function requires the use of an
Integrated
> File
>   System file JMCKEE20060905152730. The errno return from the call
is
> 3025.
> Either this file is missing, locked or damaged on the system and
cannot
> be
>   used at this time.
> Recovery  . . . :   Stop Mail System Framework ie. "ENDMSF" and
> restart
>   "STRMSF".
>
> Check earlier entries in Job Log for possible reasons for this
> failure.
>
> If system storage problem:
>
> More...
> Press Enter to continue.
>
> F3=Exit   F6=Print   F9=Display message details   F12=Cancel
> F21=Select assistance level
>
>
> In this case, the file named was located in /home/BSYPGMR4.
>
> Other files were left abandoned in / as well as /tmp
>
>
> Any suggestions as to where to look for the cause and how to fix?
>
> Thank you
>
> John McKee
>
> --
> This is the Midrange Systems Technical Discussion (MIDRANGE-L)
mailing
> list
> To post a message email: MIDRANGE-L@xxxxxxxxxxxx
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/mailman/listinfo/midrange-l
> or email: MIDRANGE-L-request@xxxxxxxxxxxx
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/midrange-l.