Re: How To Configure Console Address

[Wayne McAlpine <wayne.mcalpine@xxxxxxxxxxxxxxxxx>]

The console must be plugged into port 0 and have an address of zero. 
You need to go into setup mode and change the address of the device to 
zero.

TacK wrote:
> I have two consoles connected by TWINAX cable.
> Promary console is port 0 and address 0 and secondary
> console is port 3 and address 3. address 1 and 2 is
> shared by printer. 
>
> Now the display of the primary console has been broken
> down and I need to replace the secondary console as a
> primary. I tried to pulgin the cable which is
> connedted to the primary and turned on the console,
> but the console is recognized as port 0 and address 3.
>
> Does anybody know how to configure the address on the
> console? or do I have to IPL?
>
>
>
>  
> ____________________________________________________________________________________
> Expecting? Get great news right away with email Auto-Check. 
> Try the Yahoo! Mail Beta.
> http://advision.webevents.yahoo.com/mailbeta/newmail_tools.html