RE: Wired vs wireless - comm trace needed

["Jeff Crosby" <jlcrosby@xxxxxxxxxxxxxxxx>]

> I think you should be able to if you configure the AP's to 
> non overlapping
> channels, and I'm not even sure you need to do that.  In the 
> USA, you have
> 11 channels to select from, but to avoid overlap you can only 
> use 1,6, and
> 11.  All the intermediate ones have some range overlap with 
> the others.

I'm confused.  To do what I meant, I obviously need to assign the same ESSID
and passkey.  You mean I should, for example, use channel 6 on both AP?  Or,
say, channel 6 on one and channel 11 on the other?

Thanks.

PS, Zebra support told me how to display signal strength:
- Signal strength 100% with no variation.
- Noise level 0% with no variation.
- Signal quality 88% with no variation.