RE: load source concurrent maintenance

["Ian Carag" <Icarag@xxxxxxxxxxx>]

Update:

Concurrent maitenance on load source works. I was able to replace and rebuild the disk through SST/DST. 

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx [mailto:midrange-l-bounces@xxxxxxxxxxxx]On Behalf Of Ian Carag
Sent: Wednesday, June 11, 2008 12:50
To: Midrange Systems Technical Discussion
Subject: RE: load source concurrent maintenance


Hey Lukas,

I have 3 partitions running V5R3 on an 825 and disk protection is your regular RAID5. 
My primary partition has the failed load source in the system unit. 


-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx [mailto:midrange-l-bounces@xxxxxxxxxxxx]On Behalf Of Lukas Beeler
Sent: Wednesday, June 11, 2008 12:38
To: Midrange Systems Technical Discussion
Subject: Re: load source concurrent maintenance


On Wed, Jun 11, 2008 at 10:58 AM, Ian Carag <Icarag@xxxxxxxxxxx> wrote:
> My load source just failed on me and I've been searching the archives for the possibility of replacing the disk through concurrent maintenance.

That's certainly possible, but it depends on a lot of factors.

a) What OS Level are you running?
b) What kind of disk protection is used for the load source?
c) What kind of machine are you running?
d) What kind of disk cage is the load source is (HP/NHP)?

Every halfway new machine (POWER5 and newer) always have Hot Plug
disks - for the model 270 and similar, they were optional, and i'm not
sure about the 8xx models...