RE: Sync Date & Time via NTP?

[<elehti@xxxxxxxxxxxxxxxxxx>]

Thank you, everyone. 

CHGNTPA RMTSYS('0.pool.ntp.org' '1.pool.ntp.org') AUTOSTART(*YES) 
MAXADJ(23) ADJTHLD(*MAXADJ) ACTLOG(*POLL) SVRAUTOSTR(*YES)
SVRACTLOG(*ALL)                                      

Message ID . . . . . . :   TCP9105

Date sent  . . . . . . :   12/18/08      Time sent  . . . . . . :
16:26:36   
Message . . . . :   SNTP Activity Log is active.  File

  /QIBM/USERDATA/OS400/TCPIP/NTP/QTOT20081218 is used by the Activity
Log.     
Cause . . . . . :   The Activity Log is in use.  The Activity Log can be

  browsed by the command EDTF
STMF('/QIBM/USERDATA/OS400/TCPIP/NTP/QTOT20081218').


Edit File: /QIBM/USERDATA/OS400/TCPIP/NTP/QTOT20081218

 Record :       1   of      12 by  10                      Column :    1
91 by 126               
 Control :

 

CMD
....+....1....+....2....+....3....+....4....+....5....+....6....+....7..
..+....8....+....9....+..
     ************Beginning of data**************

    SNTP Client Activity Log QTOTNTP/QNTP/272115  12/18/08 4:26:36.858
PM                            
    TCP9136 SNTP Client started.

    TCP9146 Using time server 0.pool.ntp.org.

    TCP9162 12/18/08 4:26:38.883 PM Time remaining for adjustment is
0.000 seconds.                  
    TCP9116 12/18/08 4:26:38.883 PM NTP server UTC time is 12/18/08
22:28:57.328.                    
    TCP9117 12/18/08 4:26:38.883 PM Client clock UTC time is 12/18/08
22:26:38.771.                  
    TCP9120 12/18/08 4:26:38.883 PM Client clock adjusted = 1  (0 = not
adjusted, 1 = adjusted)      
    TCP9146 Using time server 0.pool.ntp.org.

    TCP9162 12/18/08 5:12:52.795 PM Time remaining for adjustment is
0.000 seconds.                  
    TCP9116 12/18/08 5:12:52.795 PM NTP server UTC time is 12/18/08
23:28:57.803.                    
    TCP9117 12/18/08 5:12:52.795 PM Client clock UTC time is 12/18/08
23:12:52.794.                  
    TCP9120 12/18/08 5:12:52.795 PM Client clock adjusted = 1  (0 = not
adjusted, 1 = adjusted)